User guide

T2000-T2100
EN – 6
4. OPERATING INSTRUCTIONS
4.1. INSTRUMENT DESCRIPTION
CAPTION:
1. Double input clamp
2. Multifunction key “1”
3. Multifunction key “2”
4. Multifunction key “3”
5. LCD display
6. Jaw trigger
7. RS232 half-duplex interface
(T2100)
Fig. 1: Instrument description
4.2. DESCRIPTION OF FUNCTION KEYS
Multifunction
key
Description of functions
“1”
 switching on and off the clamp
 “Ω”: selecting the resistance measuring mode
 “A”: selecting the current measuring mode (T2000)
 “RECALL”: recalling the data stored in the instrument’s memory
 “RS232”: communication with a MASTER instrument (T2100)
 “ESC”: exiting the “HOLD” function (if activated) or the setting mode of
the alarm thresholds “SET LIM.”
“2”
 “MEM”: saving data in the memory
 “CLEAR LAST”: deleting the last result saved in the memory.
 “”: increasing the number of memory locations when displaying the
saved data.
“3”
 “HOLD”: activating or deactivating the Hold function.
 ”SET LIM.”: setting the Resistance or Current alarm thresholds (T2000).
 “”: decreasing the number of memory locations when displaying the
saved data.