Owner manual

SIRIUS89N
EN - 48

LOOP 05.06.01
Message ">199.9" means
that the Resistance
measured is higher than
the maximum measurable
>199.9 Ω
---A
FRQ =50.0HZ
VP-N= 1V Vp-PE= 0V
P-N!
FUNC Z2Ω
In the mode P-P, P-N
mode the instrument
carries out the test and
detects a resistance to
higher than 199.9 Ω , the
screen alongside is
displayed.
This result can be stored pressing the SAVE key twice (according to paragraph 9.1).

LOOP 05.06.01
Message ">1999" means
that the Resistance
measured is higher than
the maximum measurable
>1999 Ω
---A
FRQ =50.0HZ
VP-N= 1V Vp-PE= 0V
RA 50V
!
FUNC UL
In the mode P-PE, R
A

mode the instrument
carries out the test and
detects a resistance to
higher than 1999 Ω , the
screen alongside is
displayed.
This result can be stored pressing the SAVE key twice (according to paragraph 9.1).

LOOP 05.06.01
Phase Sequence not
correct
RTS
FRQ =50.0HZ
VR-S=391V VS-T= 0V
VT-R= 0V
NOT CORRECT
!
FUNC
Message “LOW Voltage
Phase T”: means that
Phase T has a low voltage
value. Similar message for
Phase R and S.
In the
mode, if the
voltage of one or more
phase is too low, one or
more phase has a low
voltage the instrument
will show a screen
similar to the along side
displayed.
This result can be stored pressing the SAVE key twice (according to paragraph 9.1).