Owner manual

SIRIUS89N
EN - 32
6.3.3. RCD Faulty cases
6.3.3.1. Connection troubles

RCD 05.06.01
Disconnect the External
Power Supply Adapter
If the instrument detect
the External Power
supply adapter
connected to instrument
will show the message
displayed to side.
- - - ms
FRQ=50.0Hz Ut= ---V
VP-N=230V Vp-PE=230V
o REMOVE POWER
x1 30mA  50V!
FUNC IdN RCD UL

RCD 05.06.01
NO VOLTAGE Detected
Should the instrument
detect that the phase
and/or neutral cables
are not connected to an
installation, screen
alongside is displayed
when pressing START.
- - - ms
FRQ=50.0Hz Ut= ---V
VP-N= 0V Vp-PE= 0V
o LOW VOLTAGE
x1 30mA  50V!
FUNC IdN RCD UL

RCD 05.06.01
HIGH VOLTAGE Detected
- - - ms
FRQ=50.0Hz Ut= ---V
VP-N=401V VP-PE= 230V
o HIGH VOLTAGE
x1 30mA  50V!
FUNC IdN RCD UL
Should the instrument
detect a voltage
between phase and
neutral higher of 250V,
for example in case the
blue cable is connected
to an installation phase
conductor of a 400V
three-phase system, the
screen alongside is
displayed.