Owner manual

SIRIUS89N
EN - 12
5.4. RESET
This option re-establishes the initial settings of the instrument in ANALYZER function.
The “Current Range” parameter it is not modified by Reset command
The initial settings of the instrument consist of:
 ANALYZER CONFIG:
System: SINGLE
Frequency: not modified
Current range: not modified
Clamp type: not modified
Transforming ratio of voltmetric transformers: 1
Password: OFF
 RECORDER CONFIG:
Start: MANU (the recording starts at
00 sec mark on clock after
pressing the START/STOP key)
Stop: MAN
Integration period: 15min
Recording of harmonics: ON
Recording of Voltage anomalies (Sag and Surge: ON
Voltage Reference for Sag and Surge detection: 230V
Upper Limit for Sag and Surge detection: 6%
Lower Limit for Sag and Surge detection: 10%
Selected voltages: V1
Selected voltage harmonics: THD, 01, 03, 05, 07
Selected currents: I1
Selected current harmonics: THD, 01, 03, 05, 07
CO-GENERATION: OFF
Powers, Pf and cosϕ selected: P1
Q1i
Q1c
S1
Pf1
DPf1
Energie: Ea1
Eri1
Erc1
The RESET command will not
erase the instrument’s memory.