Manual
MACROTEST 5035
EN - 52
At the end of the test the instrument
displays the values alongside.
ρ
36.5 Ωm
2 0.93 Ω
CAUTION
The display of “Measuring” means that the instrument is measuring. During
this phase never disconnect test leads.
SAVING: The tests can be stored pressing the SAVE key twice
(according to paragraph 5.1).
Note: If START/STOP key was kept pressed, the instrument takes more consecutive
tests.
8. When a new value is acquired the instrument emits a short sound and calculates the
new average value.
9. Press DISP key to show how many measurements are in average value
calculation and the measuring mode.
10. Press CLR key if you want to cancel the medium value of the resistance
and the no. of measurements which are included in the calculation.
Note: Any test with result over 1999Ω is not inserted in the calculation of medium value.
Example: 1
st
measurement (D=1):
main display: 6,6Ωm
secondary display: 6,6Ωm
2
nd
measurement (D=1):
main display: 4,15Ω
secondary display: 2,61Ω
3
rd
measurement (not inserted in the medium value)
main display: >1999Ω
secondary display: 2,61Ω
Earth resistivity value
CLR
DISP
SAVE