Owner manual

HT4010
EN - 16
6.1.1 Safety
Comply with: IEC/ENEN 61010-1
Insulation: Double insulation
Pollution: Level 2
For inside use, max height: 2000m (6562 ft)
Installation category: CAT III 600V to ground
6.1.2 General data
Mechanical characteristics
Size: 197(L) x 70(W) x 40(H)mm ; 8 (L) x 3(W) x 2(H) inches
Weight (including battery): about 183g (6 ounces)
Max conductor size: 30mm
Supply
Battery type: 1x9V alkaline battery NEDA 1604 IEC 6F22
Low battery indication: “BAT” is displayed when the battery level is too low
AutoPowerOFF after about 15min
Display
Characteristics: 3½ LCD with maximum reading 2000 points plus decimal
point, unit symbol indication and backlight
Sample rate: 2 times/sec
Conversion mode: Mean value
6.2 ENVIRONMENTAL CONDITIONS
6.2.1 Climatic conditions
Reference temperature: 23° ± 5°C (73°F ± 41°F)
Operating temperature: 5 ÷ 40°C (41°F ÷ 104°F)
Operating humidity: <80%RH
Storage temperature: -20 ÷ 60 °C (-4°F ÷ 140°F)
Storage humidity: <80%RH
This product conforms to the prescriptions of the European directive on low voltage
2006/95/EEC and to EMC directive 2004/108/EEC
6.3 ACCESSORIES
6.3.1 Standard accessories
The content of a standard package is the following:
• Instrument HT4010
• Test leads - Cod. KIT4000A
• Carrying bag
• Battery
• User manual