Manual

HT3320
EN - 12
5.10. MEMORY STATUS SETTING
In this section it is possible to select the type of memory (internal or SD Card) in which to
save the measured data. The instrument also provides indications on the used and on the
free memory space.
1. Use the arrow keys S or T to select the options: Device memory, SD Card (see Fig.
13)
2. Press the ENTER key to format the internal memory or the SD Card. Press the down
arrow key T to confirm the operation or the up arrow key S to cancel the operation.
3. Press the ESC key to save and exit the function
Fig. 13: Memory selection for data saving
WARNING
Use a micro SD Card with a maximum capacity of 8GB
5.11. DEFAULT SETTINGS
This section allows automatically setting the factory-set default conditions on the
instrument, as described in Table 2
Parameter Default value Parameter Default value
Emissivity 0.95 Measuring unit °C
HIGH alarm Enabled Language English
LOW alarm Enabled Character color Orange
Laser Enabled Cursor Circle
Continuous
measurement
Disabled Backlight 100%
MAX/MIN Enabled Automatic power off 3 min
Average/Difference Enabled LCD switching off 30s
AT / RH% Enabled Key sound Disabled
DP / WB Enabled Memory status Internal
K type Enabled Language English
Table 2: Parameter default values