Specification Sheet

HSM Acknowledgment Form V-Press 610 eco
HSM of America LLC · 419 Boot Road · Downingtown · PA 19335 · Tel. [phone] · [e-mail] · www.hsm.us
HSM 06/2018 · All technical data and dimensions are approximate values. Technical and design modifications reserved.
Electrical connection
• The unloading of the truck and transportation to the installation location
will be arranged and paid by the customer (unless other agreements
declared in a contract)
• Forklift truck must be available to lift a minimum of 1,430 lbs
• Entrance door dimensions must be a minimum of 6'7"
• Potential floor loading must be adequate for machine
(floor loading max. = 51 lbs per ft², bale weight above)
• Ceiling height at operation location must be a minimum of 6'7"
• Please note that all offered prices are based upon the equipment already
being offloaded and set into installation location. If additional parts,
material, labor or equipment are required additional fees will apply
• Power connection of 480V - 60 Hz is required for operation
Page 1 of 3
Specifications
Pressing power 12 tons
Motor
5.1
HP
Voltage / Frequency
3 x
480 V / 60 Hz
Loading aperture W x H 32” x 20”
Bale weight (depending on material) up to 220 lbs
Bale size
32” x 24” x max. 24”
Cycle time in idle operation (theor.) 22 sec.
Acoustic level 59.6 dB(A)
Press chamber size W x D x H 31.5” x 23.6” x 41.1”
Dimensions of machine* W x D x H 46.9” x 32.1” x 78.0”
Transport dimensions of machine W x D x H 46.9” x 32.1” x 78.0”
Machine weight 1,191 lbs
Strapping 3-fold with polyester tape
*External dimensions of the machine when set up for operation.
Rated power
5.1 HP
Rated power In 8.30 A
Total fuse 3 x 15 A CC/CF/G/J/T characteristic
Operating voltage
3 x 480 V
Frequency 60 Hz
Plug connection
Twist lock Devices 20 A, 3 Phase 480C/AC,
3-Pole, 4-Wire Grounding
Cable length of power supply approx. 118“
NEMA L16-20P