Operating instructions

english
english
14 Classic 411.2 OMDD 10/2011
Switching the shredder on
• Set mains switch at rear of the
shredder to „I“.
 Green LED lights.
Shredder is ready for operation
(standby)
Shredding CDs
Warning!
Keep the safety element closed
when destroying CDs.
• Feed only one CD into the slot of
the safety element.
 The shredding pro cess is star ted by a
pho to –cell in the paper feeding opening.
 App rox. 3 sec. af ter the last CD is pulled
in the cut ting sy stem au to ma tical ly swit ches
off and returns to standby.
0
I
5 Commissioning
• Open the door of the shredder.
• Take the frame (A) and a waste bag.
• Place the waste bag on the frame and
fold over the top approx. 20 cm.
A
• Slide the frame (with bar B facing the
front of the cupboard) again into the
guide rails.
B
• Close the door of the shredder.
• Plug the machine into a properly
installed socket.
• Undo the wing screws securing the unit
during transportation.
6 Operation
Warning!
Before switching the machine on,
make sure that you observe all
safety instructions.