manual

8
LEARNING
Learn a Command
1. Press a device key (e.g. TV) where you want to learn.
2. Press and hold the SET key for more than 3 seconds, then release it.
3. Press the key to Learning in LCD menu, and then press the OK
key.
4. Press the key to Learn Key in LCD menu and then press the OK
key LCD shows Select Key, if you exit learn mode ,please press the device
key.
5. Select the (target) key you wanted to learn (e.g. Power). The LCD display
PLS Send Signal in.
6. Point the transmitter of the original remote control remotes face to the
receiver window of RC UNIVERS47 by approximately 50mm apart.
7. Press and hold the original remote key (e.g. Power) until the LCD display
Success! for 1 second. If LCD display Failed, please Repeat Steps 4-
6.
8. Repeat Steps 4-6 to learn more other keys.
9. Press a device key (e.g. TV) to quit the learn operation when all desired
remote commands are learnt.