manual

17
press the OK key.
4. Press the or key to select On:xxSEC or All on.
5. Press the or key to select LCD on time (change length of LCD on-
time from 5-60 seconds and 5 seconds as a step.).
6. Press the OK key to save setting and LCD display Success! for 1
second. You can press any device key to finish set up or press the EXIT key
to last state, or you can use or to select other set up.
Remark: Change length of LCD on time from 5-60 seconds and 5 seconds as a
step.
G. Beep
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the or key to select the OtherSet in LCD menu, and then
press the OK key.
3. Press the or key to select the Beep in LCD menu, and then
press the OK key.
4. Press the or key to change to the On or Off mode.
5. Press the OK key to save the setting, and LCD shows Success! then exit to
current setup state, You can press any device key to finish set up or press the
EXIT key to last state, or you can use or to select other set up.
H. Clear All
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the or key to select the OtherSet in LCD menu, and then
press the OK key.
3. Press the or key to select the Clear All in LCD menu, and then
press the OK key and LCD shows Sure Clear.
4. Then press the OK key to clear all settings and go back to original default
settings.