manual

16
E. Contrast Adjust
If you are not satisfied the screen contrast of your remote control, you can
use below steps to change it:
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the or key to select the OtherSet in LCD menu, then press
the OK key.
3. Press the or key to select the Contrast in LCD menu, then
press the OK key.
4. Press the or key to adjust contrast level, and then press the OK
key when you satisfied the LCD shows Success!.
5. You can press any device key to finish set up or press the EXIT key to last
state, or you can use or to select other set up.
F. LCD Delay
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the or key to select the OtherSet in LCD menu, and then
press the OK key.
3. Press the or key to select the Delay in LCD menu, and then