manual

12
Remark:
1. You can set up to maximum 10 commands in a MACRO.
2.Make sure all the keys can send out signals, otherwise even if you
programmed these keys into the MACRO, it still can not work properly when
you operate MACRO function. You can check those keys by pressing them to
see the relative Device buttons to flash or not before you set up MACRO.
3. Make sure the device must have relative conditions when you operate
MACRO function. For example the disc must be inserted into the DVD player
and a video tape must be inseted into the VCR when you like to play the DVD
or make a record by your VCR.
Delete Macro
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the or key to select the Macro in LCD menu, and then
press the OK key.
3. Press the or key to select the Macro2 in LCD menu, and then
press the OK key.
4. Press the or key to select the Delete in LCD menu, and then
press the OK key.
5. The LCD shows Sure Delete, Press the OK key to confirm the delete and
LCD display Success! then back to last state.
6. You can press any device key to finish the delete operation or press the
EXIT key to last state and use or to select other set up.