manual

11
6. Press the SET key to save the setting, LCD shows Success! then exit to
current setup state.
Macro Function
Set up Macro
Macro function let you make sequent operation for you home theater.
Please press and hold the MACRO key and 1 key ( or 2,3 key), and then
release them. The remote control will send out a sequent IR commands that
you programmed before.
You can set up a Macro by following below steps:
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the or key to select MacroSet on LCD menu, and then
press the OK key.
3. Press the or key to select the Macro1 (or Macro2 or Macro3) on
LCD menu, then press the OK key.
4. Press the or key to select the Set Up in LCD menu, and then
press the OK key.
5. You can select the device and function key for a sequent operation what
you enjoyed. (e.g.: TV+POWER+MUTE+AV, DVD+PLAY, VCR+RECORD,
etc. That means you want to turn on the TV and shut off its sound, switch TV
and input to AV port, DVD start to play disc, VCR begins to record at the
same time. )
6. Press the OK key to save the setting, LCD shows Success! then exit to
current setup state.
7. You can press any device key to finish set up or press the EXIT key to last
state and use or to select other set up.