Specifications

3
Stationery Metal Articles Cutlery
Pens, printer heads, etc. Watch parts, coins, badges valves,
nozzles, etc.
Forks, knives, spoons, etc.
OPERATING INSTRUCTIONS
1. Open the lid and ll the tank with water. Insert the article
which you want to be cleaned (must be submerged in the
water but not exceeding the top mark).
Operating the device without water will cause damage.
2. Close the cover. Connect the unit with Power
3. Press ON to start cleaning, the indicator light (blue) around
the control panel turns on.
During cleaning a “sizzling” noise can be heard, this is
normal, it comes from the tank.
4. After the cleaning is nished, disconnect from mains power
supply. Open the cover, take out the cleaned article and
drain off the water.