Specifications
Troubleshooting
Malfunction Cause Remedy
The load will not work • wrong light-control
setting selected
• Adjust setting
• load faulty
• Change load
• mains switch OFF
• Switch ON
The load work always • continuous movement
in the detection zone
• check zone setting
The load work without any
identiable movement
• the sensor not
mounted for detecting
movement reliably
•
securely mount enclosure
• movement occurred,
but not identied by
the sensor(movement
behind wall, movement
of a small object
in immediate lamp
vicinity etc.)
• Check zone setting
The load will not work
despite movement
• rapid movements are
being suppressed
to minimize
malfunctioning or the
detection zone you
have set is too small
• Check zone setting
NOTE: the high-frequency output of the HF sensor is <10Mw- that is just
one 100th of the transmission power of a mobile phone or the output of a
microwave oven.
< 10mW approx. 1000mW
3