Specifications

English
Deutsch
FrançaisNederlandsItalianoEspañolMagyarSuomiSvenskaČeskyRomânăΕλληνικά
4
Setting price of cost/kWh & over load current:
Press and hold FUNC button for 5 seconds during display state of voltage or current or
power.
Setting price 1:
Press SET button once and release, SET display, the rst digital COST.kWh ash, 1)
press UP button to set it
Press SET button once and release, the second COST/kWh ash, press UP 2)
button to set it
Press SET button once and release, the third COST/kWh ash, press UP button 3)
to set it
Press SET button once and release, the fourth COST/kWh ash, press UP button 4)
to set it
Press SET button once and release, the radix point COST/kWh ash, press UP 5)
button to set it
Press SET button once and release, the weekday ash, press UP button to set it6)
Press SET button once and release, the hour of ON TIME ash, press UP button 7)
to set it
Setting price 2:
Press FUNC button once and release after nish Setting price 1, setting price 2. 1)
repeat above steps
Setting OVER LOAD current data:
Press FUNC button once and release after nish setting price 2
Press SET button once and release, SET and AMP display, the rst digital MAX. 1)
LOAD ash, press UP button to set it
Press SET button once and release, the second digital MAX.LOAD ash, press 2)
UP button to set it
Press SET button once and release, the third MAX. LOAD ash, press UP button 3)
to set it
Press SET button once and release, the fourth MAX. LOAD ash, press UP 4)
button to set it
The OVER LOAD WARNING will ash when load overtop the setting data. The button
function will failure. You must draw out the appliance or set the OVER LOAD data
again.