Specifications

9
Setting OVER LOAD current data:
Press FUNC button once and release after nish setting price 2
1) Press SET button once and release, SET and AMP display, the rst digital MAX. LOAD ash, press
UP button to set it
2) Press SET button once and release, the second digital MAX.LOAD ash, press UP button to set it
3) Press SET button once and release, the third MAX. LOAD ash, press UP button to set it
4) Press SET button once and release, the fourth MAX. LOAD ash, press UP button to set it
The OVER LOAD WARNING will ash when load overtop the setting data. The button function will
failure. You must draw out the appliance or set the OVER LOAD data again.
Stand by mode
Display of LCD will disappear without any operation after AC power off 10 seconds. Press any key
come back to display.
Specication:
• Power supply 240V AC 50Hz
• Max. load 16A, 3680W
• Voltage range 200-276V AC, accuracy +/- 0.5% max
• Current range 0.005-16A, accuracy +/- 0.5% max
• Power accuracy +/- 0.5% max
• Accumulative electric quantity range 0-9999.9kWh
• Frequency range 45-65Hz
• Clock accuracy max +/- 1minute per month
• Power cost <0.5W
• Operating temperature -10°C to +40°C
• Battery 3.6V NI-MH, rechargeable battery
Safety precautions:
When using the TV smart power saver, safety precautions should always
be practice to reduce the risk of re, electric shock and injury, as following:
Understanding all instructions before using this device.
To reduce risk of electric shock, this product should ONLY be opened by an authorized technician
when service is required. Disconnect the product from mains and other equipment if a problem should
occur.
Do not expose the product to water or moisture.
This device should only be operated from the type of power source indicated on the label. If you are
not sure of the type of power supply to your home, please consult your dealer for more information.
Do not overload the socket; this can be a risk of re or electric shock.
Never push objects of any kind into this device trough cabinet as they may touch dangerous voltage
point or short out parts that could result in the risk of re or electric shock.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modications of the product or damage
caused due to incorrect use of this product.
General:
Designs and specications are subject to change without notice.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION