User manual

Charging Instructions

1. Insert 2/4 pieces of AA/AAA/C/D or 1/2 pieces of 9V cell rechargeable

Ni-MH/Ni-Cd batteries into the battery compartment; battery must

be charged in pairs (9V cell can be charged individually). For

charging only 2 pieces of AA/AAA/C/D cells, insert the batteries to

the left or right side of the charging terminal (Fig. 1) & (Fig.2)

2. Batteries must be charged in pairs with same battery size &

capacity; If the different size of batteries are placed in one charging

terminal, the RED LED will ﬂ ash and the charging is terminated.

3. Make correct contact for polarity (+ and –); according to the sign in

the battery compartment.

4. Do not mix to charge Ni-MH or Ni-Cd batteries at same time.

5. When using at indoor

Connect the supplied AC adaptor’s barrel plug into the jack on the

back of the charger. Plug the AC adaptor into household electric

outlet.

Caution: The supplied AC adaptor supplies 12VDC and delivers

800mA, and its plug ﬁ ts into the charger’s DC input jack. Using an

adaptor that does not meet these speciﬁ cations could damage the

charger or the adaptor.

Fig. 1

Fig. 2