User manual
4
2. Insert 2 or 4 pieces of AA/AAA rechargeable Ni-MH batteries into
the battery compartment; battery must be charged in pairs. For
charging only 2 cells, insert the batteries to the left side of the
charging terminal. (Fig. 1)
3. Make correct contact for polarity (+ and -); according to the sign in
the battery compartment.
4. Charge either AA or AAA size at a time.
5. When using indoor
Connect the supplied AC adaptor’s barrel plug into the jack on the
back of the charger. Plug the AC adaptor into household electric
outlet. The switching power supply will adjust automatically.
Caution: The supplied AC adaptor supplies 12VDC and delivers
600mA, and its plug fi ts into the charger’s DC input jack. Using an
adaptor that does not meet these specifi cations could damage the
charger.
When using in a vehicle
Connect the supplied DC car adaptor’s barrel plug into the charger’s
DC input jack. Plug the large end of the cord into the 12V car lighter
power port.
6. The LCD will indicate the proper charging. After the batteries are
fully charged, the word "Full" will indicate on the LCD screen to
indicate the trickle charge. The charged batteries are ready for use.
(Fig.B)
7. Unplug the charger and remove the batteries from the charger
when not in use.
8. Begin again at Step 1 to charge the next set of batteries.
(Fig. 1)