User's Manual

TP808 User Manual
78
● Click “Scan”, choose a connectable “hot spot” from SSID options. type in the password of
Wi-Fi that you want to connect to.
● Click “Set”. After it is set successfully, the printer would restart automatically.
SSID
The SSID name that is chosen after scanning “hot spot”
DHCP
Enable/Disable dynamic allocation of IP
IP Address
When DHCP is at Enable status, IP address will be allocated
automatically, no need to do the setting;
When DHCP is at Disable status, IP address must be set to the
same LAN with the Wi-Fi that you connect to
Default gateway
When DHCP is at Enable status, default gateway will be allocated
automatically, no need to do the setting;
When DHCP is at Disable status, default gateway can be input
Subnet mask
When DHCP is at Enable status, subnet mask will be allocated
automatically, no need to do the setting;
When DHCP is at Disable status, subnet mask can be input