User's Manual
Table Of Contents
- Statement
- Important Safety Instructions
- 1 OVERVIEW
- 2 GETTING STARTED
- 3 SPECIFICATION
- 4 INSTALLATION AND USAGE
- 5 INTERFACES
- 6 TROUBLESHOOTING
- 7 PRINTER CLEANING AND MAINTENANCE
- 8 DOWNLOAD SOFTWARES FROM HPRT WEBSITE
- 9 UTILITY TOOL FOR POS INSTRUCTION
- 10 WINDOWS DRIVER
- APPENDIX
TP808 User Manual
60
● Modify the COM setting
1） After setting the parameters as required, click "Write" and restart the printer.
2） After restarting the printer, open the main menu screen of the tool and click "Modify Printer".
3
）
Select the port category "COM" and set the baud rate to the value "57600" as shown above, and
parity "None". This port allows you to print after setup is complete.
Note: When the DIP setting is set in memory switch mode, the DIP switch at the bottom of the
printer need to be disabled.