User's Manual

TP808 User Manual
16
4.6.2 Wi-Fi Settings
Printer factory default Wi-Fi mode is AP mode with IP address “192.168.1.1” and SSID “POS_WIFI”.
After the PC or mobile phone is connected with printer successfully, users can set the parameters
through utility tool.
Please refer to the Wi-Fi Operation Manual for details
QR code for Wi-Fi Operation Manual
4.7 Print Test
4.7.1 Print Self-Test
The self-test checks the printer’s current settings, status and whether the printer has any problem.
1
）
Make sure the power is connected and paper is loaded properly.
2）Make sure the printer is off and top cover is closed properly.
3）Press the paper feed button and power button simultaneously to turn the printer on. The printer
is ready to receive data as soon as it completes the self-test.
4.7.2 Printing of Windows Driver Program
1
）
Install the Windows Driver program. (Please refer to the Windows Driver Manual)
2
）
Please set the “Interface” as the type you use.
3）Use the Windows Driver Program to print out the “Print Test Page”.