User's Manual

Battery Safety Precautions
Ignore the following instructions may cause battery overheating, fire, explosion,
damage and/or performance, and reduced product life.
1. Be sure to use the specified battery and power charger provided by our company,
do not disassemble the printer to replace the non-official battery, or may cause fire,
explosion or damage to the printer.
2. Do not allow water, sea water from entering or leaking into the battery. If the
batteries internal safety device burn, when charging it, it may produce abnormal
current and/or voltage, or abnormal chemical reaction when charging it, then may
cause the battery overheating, fire and/or explosion.
3. Do not use or place the battery nearby the stove or other high temperature
places. Excessive heat maybe damage the resin shell and/or the insulation materials,
thereby cause short-circuit inside the battery, then the battery may be overheated,
burning and/or explosion.
4. When charging, use a specified USB Type-C cable. Other conditions (high
temperature, high pressure/high current, using the modified battery charger, etc.)
excluded here may result in over-charging the battery and abnormal current and/or
voltage, cause abnormal chemical reaction, and may cause the battery overheat,
light and/or explosion.
5. Do not heat the battery or put the battery into fire. This may melt insulation
material and/ or damage safety devices or safety equipment, then ignite electrolytic
solution, and cause the battery overheat, burning and/or explosion.
6. Do not throw or attack the battery heavily. If internal safety device of the
batteries burn, the battery charging may cause any abnormal current and/or voltage,
and abnormal chemical reaction, and lead to the battery overheat, ignite, and/or
explosion.
7. The liquid in the battery is corrosive, if improper operation causes battery leak,
and the liquid is spattered on the skin or clothes, please wash it with water, if
spattered into the eyes, please rinse them with water thoroughly and see a doctor.