Mobile Printer MT800 User Manual Xiamen Hanin Electronic Technology Co., Ltd. Add: 5F, 8#, Aide Airport Industrial Park, Huli District, Xiamen, China Web: www.hprt.
REVISION RECORDS REV. DATE DESCRIPTION DRAWN CHECKED APPROVED 1.0 2019.08.
Statement This manual content may be altered without permission, and Xiamen Hanin Electronic Technology Co., Ltd. reserves the rights to make changes without notice in technology, spare parts, hardware and software of the products. If more information is needed about the products, please contact Xiamen Hanin Electronic Technology Co., Ltd. Without any written permission from the company, any section of this manual is prohibited to be copied or transferred in any form.
Important Safety Instructions Please read this chapter carefully before using the printer! Using the Printer 1. Water or other liquid should not spill into the printer, also the printer should not be expose to the rain, or else may cause printer damage. 2. Do not open the printer cover while the printer is printing, otherwise the printer may work improperly. 3. Too high(40℃)or too low(0℃) temperature will lead to the decrease of print quality. 4.
Battery Safety Precautions Ignore the following instructions may cause battery overheating, fire, explosion, damage and/or performance, and reduced product life. 1. Be sure to use the specified battery and power charger provided by our company, do not disassemble the printer to replace the non-official battery, or may cause fire, explosion or damage to the printer. 2. Do not allow water, sea water from entering or leaking into the battery.
Other Precautions The copyright for this user manual and various other manuals is property of our company. Any copying or conversion into electronic form and saving of this material without the express written permission is strictly prohibited. Use of the information contained in this manual is not subject to any patent liability. This manual has been prepared with utmost care and attention to detail but may contain certain errors and/or omissions.
CONTENTS 1 Introduction......................................................................................................................................1 1.1 Introductions......................................................................................................................... 1 1.2 The main Features.................................................................................................................1 1.3 Packing List...........................................................
.4. Using Utility Tool................................................................................................................ 31 8.4.1 Add Printer............................................................................................................... 32 8.4.2 Modify Printer.......................................................................................................... 33 8.4.3 Delete Printer...........................................................................................
MT800 User Manual 1 Introduction 1.1 Introductions HPRT A4 Mobile Printer, print anytime and anywhere. Virtual will be transformed into reality, making mobile office a new trend. The distance between home and office will be shortened, and the working place will no longer be limited. MT800 supports ribbon with RFID authentication to ensure HPRT’s orginal high quality consumables. HPRT, print your beautiful world. Note: RFID is passive, not transmitted 1.2 The main Features 1.
MT800 User Manual 1.4 Appearance and Component Front Left Note: represents a wireless function in the figure. Inside Note: Paper out detection and Paper near end detection: Detecting whether or not there is paper and whether the paper deviation occurs during the paper fed process.
MT800 User Manual 2. General Specification 2.1 Printer Specification Table 2-1 General Specification Printing Parameter Paper Item Printing Method Resolution Printing Speed Printing Width Printing Density Printing protocol Type Width Thickness Ribbon Specification Sensors Communicati Standard on Interface Type Battery Voltage Capacity Input Power Output Reliability TPH life RAM Memory Flash Dimension (L×W×H, mm) Weight Certificates Parameter Direct thermal/Thermal transfer printing 300DPI MAX.
MT800 User Manual 2.2 Media Specification Paper type Paper width Paper thickness Thermal fax paper 210mm 60-90μm A4 copy paper 210mm 60-90μm 2.3 Ribbon Specification Ribbon Parameter Width 215mm Length 14m Diameter 14.5mm 2.4 Dimension • Dimension: 310.5(L)×63.5(W)×39.
MT800 User Manual 3. Installation and use of printer 3.1 Open Printer Cover 1.Press the cover open button meanwhile, then lift the printer cover upward. 3.2 Loading Ribbon 1.Hold the ribbon module by hands, then align it to the spacing hole and press down. Note: To avoid errors during installing ribbon, please make sure that the arrow direction marked on the ribbon module is the same as the arrow direction marked in the printer.
MT800 User Manual 2.Turn the rewind wheel to make the ribbon smooth. 3.Press down the cover by hands until you hearing the sound of “click”. 3.3 Loading Media 1.Make sure the ribbon is properly loaded, long touch power button, and release it after the printer is turned on. 2.Put the paper into the paper entry slot in parallel. Printer will feed a distance automatically after it detects the paper.
MT800 User Manual 3.4 Removing Media Note: Don’t pull the paper out forcefully while the printer cover is closed, or it may cause damage. Please remove the paper according to follow steps. 1. Press the open button meanwhile, then lift the printer cover upward. 2. Remove media. 3.5 Printing Operation 3.5.1 Mobile Phone 1.
MT800 User Manual 3.5.2 Computer You can connect the computer via Bluetooth/USB, then installing printer driver. USB connection Bluetooth connection 3.6 Instruction for Sleep(Standby) Mode In order to save power and prolong the service time, MT800 printer adopts automatic sleep and automatic wake-up technology. After the printer is turned on, if there is no operation on the printer within 5 minutes, the printer will enter standby mode.
MT800 User Manual 4. Partial Component Description 4.1 Button 1.Power Button ①Turn On In the turn off state, long touch the power button about 2 seconds and the printer will be turned up; ②Turn Off In the turn on state, long touch power button about 3 seconds and the printer will be turned off; ③Print Self Test In the turn on state, continuously touch power button 3 times, the printer will print the self-check page. 2.
MT800 User Manual 4.2 LED Indicator and Buzzer MT800 has two LED, front strip lamp and side pinhole lamp. 1. Front Strip Lamp The front strip lamp focuses on the status of printer. The status is divided into four categories: behavior indication (red, green, white), charging indication (green), abnormal indication (red), and printing indication (white).
MT800 User Manual ④Behavior status Status LED (Red, Green, White) Turn on Flash a round Firmware upgrade Alternating flash Turn off Flash a round 2. Side Pinhole Lamp The side pinhole lamp is a blue monochrome lamp, focusing on the connection status of the printer.
MT800 User Manual 5. Troubleshooting Your printer is very reliable, but occasionally problems may occur. This chapter provides information on some common problems you may encounter and how to solve them. If you encounter problems that you can not resolve, contact your dealer for assistance. 5.
MT800 User Manual 5.
MT800 User Manual 6. Clean Printer 6.1 Cleaning Head Printing quality might be degraded by dust, foreign substance, adhesive substance, or other pollution materials stuck in the printer head or inside the printer. When dirty, clean the print head as follows: ※ Notes: 1.Make sure to turn the printer power off prior to cleaning. 2.Open the paper cover and ribbon assembly, and remove the paper and ribbon. 3.
MT800 User Manual 7. Windows Driver 7.1 Manual Information This Windows Driver Installation Manual provides information on installation, detailed specifications, and usage of the printer’s Windows Driver according to PC operating system (OS). We maintain ongoing efforts to enhance and upgrade the functions and quality of all our products. As follows, product specifications and/or user manual content may be changed without prior notice. 7.
MT800 User Manual 7.4 Windows Driver Installation Notes: Under different operating system and different type of driver, the screen has slight difference. Please operate it according to the tips. Take HPRT MT800 (Windows 7) as example. 1.Double click Windows Driver. 2.Choose “English” and click “OK”. 3.Choose “I accept the agreement”, then click “Next”.
MT800 User Manual 4.Click “Next”. Note: If printer is already connected with computer by USB port, it only needs to click “Install”, then it will be installed automatically. Otherwise, proceed to the next step. 5.Choose the matched type and port (USBxxx is for USB port, COMx is for serial port, LPTx is for parallel port). Choose the type of driver, port, such as “MT800”, “USB” as port. Click “Next”.
MT800 User Manual 6.Click “Finish”, the driver is installed successfully. 7.After installation, the icon will be found in “Start”→ “Devices and Printers”.
MT800 User Manual 7.5 Detailed Windows Driver Setting 7.5.1 Printing Preferences 1.Click “Start" → “Devices and Printers”. Right click “HPRT MT800” and choose “Printing preferences”. 2.According to the different needs, choose “Paper”\“Offset”\“Rotate”\“Effect”\ “Copies” in “Page”.
MT800 User Manual • Select “Paper Name” • Click “Manager”, add or delete paper 20
MT800 User Manual • Setting “Horizontal”, “Vertical” • Setting “Rotate”, “Effect” 21
MT800 User Manual • Click “Advanced” • Save Paper 22
MT800 User Manual • Feed Paper • Custom Command 23
MT800 User Manual • Media Type 3.Click “Watermark”. Set watermark to print.
MT800 User Manual 4.Click “Halftone” to set the halftone.
MT800 User Manual 7.5.2 Printer properties 1.Click “Start” → “Devices and Printers”. Right click “HPRT MT800” and choose “Printer properties”. 2.Choose “General”, click “Print Test Page”, then it will print the current settings.
MT800 User Manual 3.Click “Port” to choose another port or add port. 4.Click “Advanced” to set the available time for printing.
MT800 User Manual 7.6 Uninstall Windows Driver 1.Double click Windows Driver. 2.Choose “English” and click “OK”. 3.Choose “Uninstall printer driver”. Click “Next”.
MT800 User Manual 4.Choose “HPRT MT800”, click “Next”. Then it is complete to uninstall. 5.Uninstall successfully.
MT800 User Manual 8. Mobile Utility Tool Manual 8.1 Manual Information This Manual provides information on usage of the printer’s Utility Tool For Mobile according to PC operating system. We maintain ongoing efforts to enhance and upgrade the functions and quality of all our products. As follow, product specifications and/or Utility Tool manual content may be changed without prior notice. 8.
MT800 User Manual 8.4. Using Utility Tool Warning: Under different operating system, the screen has slight difference. Please operate it according to the tips. Take Windows 7 as example. 1.Unzip the compressed package file, then open the folder, click Printer Utility For Mobile.
MT800 User Manual 8.4.1 Add Printer 1.Click “Add Printer”. 2.Choose the right printer model and port type, then click “OK”. 3.Add printer is finish.
MT800 User Manual 8.4.2 Modify Printer 1.Choose the printer that needs to be modified. Click on "Modify Printer". 2.Choose the printer model and port type that needs to be modified, then click “OK”. 3.Modify the new printer is finish.
MT800 User Manual 4.For example, when connecting via Bluetooth, you need to change the port to COM to connect. The specific actions are as follows: 1) Turn on the printer. 2) Turn on the upper device. The Bluetooth icon will show at the lower right of the screen. If the upper device is not configured with Bluetooth function, you need to insert a Bluetooth Dongle into its USB connector. 3) Right click the icon, choose "Add a Device".
MT800 User Manual 4) Find the corresponding printer, click “Next”. 5) Add a printer to succeed as shown in the figure. The printer takes MT800-140C as an example.
MT800 User Manual 6) Click “Start" → “Devices and Printers”. Right click “MT800-140C” and choose “Properties”. 7) In “MT800-140C Properties” dialog box, choose the “Services” window and find the corresponding port. As shown in the figure, the port of MT800-140C is COM3.
MT800 User Manual 8) Open the printer utility and click “Modify Printer”. 9) Choose “Printer Model” as MT800, “Port Type” as COM, “COM Port” as COM3. Then click “OK”.
MT800 User Manual 10) Modification of printer successfully.
MT800 User Manual 8.4.3 Delete Printer 1.Choose the printer which you want to delete in the list, then click on "Delete Printer". 2.Click “OK ”, then the printer is deleted.
MT800 User Manual 8.4.4 Connection Test 1.Click “Connection Test”. If the connection is successful, it will appear the following window. Note: 1.Make sure printer is connected with computer and power on. 2.Before using the following function, carry out the “Connection Test” first.
MT800 User Manual 8.4.5 Functions The function of Printer Utility For Mobile contains four items. Click the button and printer will execute the appropriate action. Note: The following screen may differ depending on the device to which you connect. Please operate it according to the actual interfaces. 1.Print Self Information: the printer will print out setting information.
MT800 User Manual 2.Parameter Config: to set “Bluetooth”, “Print Density”, “Power Down Time” in the Parameter setting. When complete the above settings, please restart the printer. Note: Power Down Time is only valid for unconnected Bluetooth. 3.Click “Command Test”, you can load file or input the text in the input on the left, then click “Send”, the printer will print the text out accordingly.
MT800 User Manual Click “Hex”: 43
MT800 User Manual 8.5. Firmware Update 1.Click “Firmware Update”. 2.Select the appropriate upgrade file and click “Download”.
MT800 User Manual 3.The firmware upgrade was successful and please restart the printer. FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
