MSA 2060 Storage Array

Table Of Contents

QuickSpecs

HPE MSA 2060 Storage Array

Standard Features

Page

Management

• New redundant web based interface (SMU v4)

• HPE MSA Health Check

• New RESTful interface

• CLI

• Firmware Update Server – automatically receive notification of new firmware availability

• Non-disruptive on-line controller code upgrade. Requires Multi-pathing software

• Arxscan Arxview remote monitoring via HPE Complete

Data Protection

• Self-encrypting SSDs and HDDs

• Drives FIPS 140-2 Level 2 certified

• Remote Snapshot (Array-based asynchronous replication)

• VMware Site Recovery Manager

• Zerto Virtual Replication via HPE Complete

•

Optional locking bezel

Product Technology

Storage Controllers

• The MSA 2060 FC controllers support 16Gb FC host connectivity.

• The MSA 2060 iSCSI controllers support 10GbE iSCSI host connectivity.

• The MSA 2060 SAS controllers support 12Gb SAS host connectivity.

• No converged SAN controllers with MSA 2060 models.

• Dual controller active/active (dual pool) design. System can be configured as active/passive (single pool).

• Controllers contain next generation RAID offload ASIC and CPU.

• 24GB System cache

• 12Gb SAS expansion ports.

Notes: The MSA 2060 does not support single controller configurations. Single-controller support is provided only when a

controller fails over to its partner controller.

Modular Chassis

• New chassis design with the MSA array and drive enclosures.

• 2U rack height 12 LFF or 24 SFF drive bays, depending on model.

• 12G SAS Midplane.

• Next generation drive modules.

• New locking bezel kit for added security.

Available Drives

The MSA 2060 Storage Systems support a wide variety of MSA 3.5-inch LFF drives, and MSA 2.5-inch SFF drives.

• Solid-State Drives (SSDs) deliver the highest levels of performance and reliability.

• Enterprise-class SAS hard disk drives (10K/15K RPM) offer a balance of performance, capacity, and cost while delivering

enterprise grade reliability.

• Midline SAS hard disk drives (7.2K RPM) are optimized to provide the best ratio of capacity to cost.