QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Product Highlights HPE StoreEver MSL2024 and MSL4048 Tape Libraries The HPE StoreEver MSL Tape Libraries meet demanding storage requirement of businesses needing unattended backup, disaster recovery, or archive capability. The MSL Libraries offer a broad choice of storage capacity and technology including LTO-8, LTO-7, LTO-6 or LTO-5 Ultrium tape drives.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Product Highlights Maximum Data Transfer (Native) Drive Interface Key Features • • • • • • • • • • • • • 2.16 TB/hr (2 LTO-8 drives) 4.32 TB/hr (4 LTO-8 drives) 8 Gb Native Fibre Channel 8 Gb Native Fibre Channel 6 Gb/sec SAS 6 Gb/sec SAS Exceptional storage density: 720 TB with MSL2024, 1.44 PB with an MSL4048(2.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Product Highlights TapeAssure Advanced analytics features makes use of predictive forecasting to anticipate the likelihood of bottlenecks, failures and load balancing issues in the tape library environment. Analysis of drive/tape utilization helps users to understand available capacity and performance which helps to plan ahead. For more information about TapeAssure Advanced, please visit http://www.hpe.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Product Highlights • HPE 1/8 G2 & MSL Encryption Kit The HPE 1/8 G2 & MSL Encryption Kit provides a library-enabled encryption solution that greatly enhances data privacy, confidentiality, and integrity of your critical business data while supporting compliance requirements.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Product Highlights • • • It optimizes performance and maximizes overall efficiency, allowing the drive to respond immediately to any data speed changes from the host. It minimizes rewinding and repositioning of the tape, significantly reducing physical wear and increasing reliability. It minimizes the power requirements for the drive by reducing the number of repositions needed.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Product Highlights Packard Enterprise management solutions, allowing managing data protection as an essential element of an overall IT service. Data Protector software simplifies the use of complex backup and recovery procedures with the fastest installation, automated routine tasks, and easy-to-use features.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Product Highlights supported through Factory Express include a wide array of servers and storage: HPE Integrity, HPE ProLiant, HPE ProLiant Server Blades, HPE BladeSystem, and HPE 9000 servers as well as MSA, VA7xxx, EVA, and XP disk arrays, rackable tape libraries and configurable network switches. Type of service support varies by platform and product family.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Service and Support and Warranty Information Warranty MSL2024: The warranty for this product consists of 1-year parts exchange, next business day MSL4048: The warranty for this product consists of 1-year parts exchange, next business day NOTE: The HPE MSL Tape Libraries warranty includes support for Customer Self Repair (CSR).
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Service and Support and Warranty Information turn to the storage experts at HPE Services. Our Backup and Recovery Solution Service (BRSS) provides end-to-end management of your backup integration process.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Configuration Information Step 1 - Select Base Library HPE StoreEver MSL Tape Description Libraries HPE StoreEver MSL2024 0-drive Tape Library NOTE: Includes 24 slots, zero drives. NOTE: This product is TAA (Trade Agreements Act) compliant. HPE StoreEver MSL4048 0-drive Tape Library NOTE: Includes 48 slots, zero drives. NOTE: This product is TAA (Trade Agreements Act) compliant.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Configuration Information NOTE: This product is TAA (Trade Agreements Act) compliant. HPE StoreEver MSL LTO-6 Ultrium 6250 SAS Drive Upgrade Kit NOTE: Half height LTO-6 SAS tape drive. For use with the MSL2024, 4048, 3040 or MSL6480 libraries. Drive kit includes a tape drive and documentation. NOTE: #0D1 will appear after C0H27A on the sales order if HPE factory integration is indicated. NOTE: This product is TAA (Trade Agreements Act) compliant.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Configuration Information KMIP 1.2 compliant key management servers. See the HPE Data Agile DAPR Compatibility Matrix (Formerly EBS) for the list of supported servers. http://www.hpe.com/storage/DAPRcompatibility NOTE: This license will be delivered electronically. Step 4 - Select Additional Accessories Regional Power Cords NOTE: One PDU power cord is shipped per library.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Related Options Redundant Power Supply HPE StoreEver MSL Redundant Power Supply Upgrade Kit NOTE: For use in the MSL4048Tape Library to add a second customerUpgrade Kit installable power supply into the unit. HPE MSL Redundant Power Supply ships with PDU power cord (C13/C14, 10A, P/N 142257-002).
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Related Options HBAs and SAS Controllers Media HPE Smart Array P408e-p SR Gen10 (8 external lanes/4GB cache) NOTE: Recommended for ProLiant Gen10 SAS tape automation connect HPE Smart Array E208e-p SR Gen10 (8 external lanes/No cache) NOTE: Recommended for ProLiant Gen10 SAS tape automation connect HPE Smart Array P431/2GB FBWC 12Gb 2-ports Ext SAS Controller NOTE: Recommended for ProLiant Gen9 SAS tape automation connect HPE H241 12Gb 2-ports
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Related Options HPE LTO-8 Ultrium 30TB RW 20 Data Cartridges Custom Labeled with Cases HPE LTO-8 Ultrium 30TB WORM 20 Data Cartridges Custom Labeled with Cases HPE LTO-8 Ultrium 30TB RW 20 Data Cartridges Custom Labeled Library Pack without Cases HPE LTO-7 Ultrium Type M 22.5TB RW 20 Data Cartridges Custom Labeled with Cases HPE LTO-7 Ultrium Type M 22.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Related Options HP SAS Min-Min 1x-2M Cable Assembly Kit NOTE: One SAS autoloader only. Use this cable to connect HPE SAS external tape devices to HPE SAS controllers with external Mini-SAS (SFF8088) connectors. HP SAS MIN-MIN 1X-4M Cable Assembly Kit NOTE: One SAS autoloader only. Use this cable to connect HPE SAS external tape devices to HPE SAS controllers with external Mini-SAS (SFF8088) connectors.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Technical Specifications MSL2024 LTO-8 Ultrium 30750 LTO-7 Ultrium 15000 Drive Technology LTO-6 Ultrium 6250 MSL4048 LTO-8 ULtrium 30750 LTO-7 Ultrium 15000 LTO-6 Ultrium 6250 LTO-5 Ultrium 3000 LTO-5 Ultrium 3000 Maximum Number of Drives Up to 2 24 8 Gb Native Fibre Channel Up to 4 48 8 Gb Native Fibre Channel 6 Gb/sec SAS 6 Gb/sec SAS Native 288 TB (LTO-8) 144 TB (LTO-7) 60 TB (LTO-6) 36 TB (LTO-5) 576 TB (LTO-8) 288 TB (LTO-7) 120 T
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Technical Specifications Initialization Time Inventory Time 80 to 120 seconds 2:15 minutes (using bar code labeled cartridges) 1:20 minutes (using bar code labeled cartridges) Mini-SAS (MSL SAS model only)Connectors 68-pin HDTS ( MSL SCSI models only) LC Optical Fibre (MSL FC models only) (1)RJ-45 Ethernet (1) USB port Ready LED (Green): shows ready status information LED Indicators Clean LED (Amber): shows fault status information (on front pa
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Summary of Changes Date 04-June-2018 Version History From Version 59 to 60 Action Changed 05-Mar-2018 05-Feb-2018 From Version 58 to 59 From Version 57 to 58 Changed Changed 04-Dec-2017 04-Sept-2017 07-Aug-2017 From Version 56 to 57 From Version 55 to 56 From Version 54 to 55 Changed Changed Changed 17-Feb-2017 13-Jan-2017 18-Nov-2016 From Version 53 to 54 From Version 52 to 53 From Version 51 to 52 Changed Changed Changed 30-Sept-201
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Summary of Changes Configuration Information: Updated all section in Step 1 and first section in Step 2 Related Options: Updated Optical cables, Cable Kits (SCSI,SAS), Rack Cabinets and Media sections. 18-Jan-2013 From Version 35 to 36 Changed Technical Specification: Updated Chart sections Maximum Capacity, Average Cartridge Swap Time in Extended Libraries (drive to slot, slot to drive) and Connectors sections.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Summary of Changes 8-Jul-2011 From Version 18 to 19 Changed 17-Jun-2011 17-Jun-2011 From Version 17 to 18 From Version 16 to 17 Changed Changed 8-Jun-2011 27-Sep-2010 From Version 15 to 16 From Version 14 to 15 Removed Changed Revisions were made in Configuration Information and to Redundant Power Supply Upgrade Kit in Related Options.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Summary of Changes 9-Oct-2009 From Version 8 to 9 Removed 24-Sep-2009 From Version 7 to 8 Added Removed 14-Sep-2009 From Version 6 to 7 Added for LTO-4 Ultrium 1760 in the Technical Specifications section. Removed part number AH219A from Step 1 of Configuration Information. Added part numbers AK379A & AK381A to step 1 of the Configuration Information section. Removed part number AH219A from the Recommended Services section.
QuickSpecs HPE StoreEver MSL2024 and MSL4048 Tape Libraries Summary of Changes © Copyright 2018 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
