MSA 2062 Storage Array

QuickSpecs
HPE MSA 2062 Storage Array
Standard Features
Page
5
Storage Services
• Virtual Storage
- Up to two pools (1PB each)
- Automated tiering v2.0
- SSD read cache extension
- Thin Provisioning
- Volume Copy
- Snapshot capability (512 snapshots per array, standard)
• Virtual Storage Disk Groups can be spanned across multiple enclosures.
• Virtual Storage RAID levels supported: 1, 5, 6, 10, MSA-DP+
• New disk group type (MSA-DP+):
- Integrated sparing
- Fast rebuilds
- Improved sequential performance
- Incremental disk group expansion
Management
• New redundant web based interface (SMU v4)
• HPE MSA Health Check
• New RESTful interface
• CLI
• Non-disruptive on-line controller code upgrade. Requires Multi-pathing software
• Arxscan Arxview remote monitoring via HPE Complete
Data Protection
• Remote Snapshot (Array-based asynchronous replication, standard)
• VMware Site Recovery Manager
• Zerto Virtual Replication via HPE Complete
• Optional locking bezel
Product Technology
Storage Controllers
• The MSA 2062 FC controllers support 16Gb FC host connectivity.
• The MSA 2062 iSCSI controllers support 10GbE iSCSI host connectivity.
• The MSA 2062 SAS controllers support 12Gb SAS host connectivity.
• No converged SAN controllers with MSA 2062 models.
• Dual controller active/active (dual pool) design. System can be configured as active/passive (single pool).
• Controllers contain next generation RAID offload ASIC and CPU.
• 24GB System cache
• 12Gb SAS expansion ports.
Notes: The MSA 2062 does not support single controller configurations. Single-controller support is provided only when a
controller fails over to its partner controller.