G2 Advanced Series Racks

QuickSpecs
HPE G2 Advanced Series Racks
Related Options
Page
7
Hewlett Packard Enterprise offers a full line of accessories and options that can be added to HPE Racks allowing you to customize
each rack to fit your IT requirements.
HPE Rack accessories include upgrades such as side panels, baying kits, cable management
kits, drawers, shelving, and filler panels. To build a complete rack and power infrastructure for your IT environment, Hewlett Packard
Enterprise also offers
a full line of options that include power distribution units (PDU), uninterruptible power systems (UPS), and
KVM (keyboard, video, mouse) consoles and switches.
See HPE Rack and Power Infrastructure for more complete information
at:
https://www.hpe.com/info/rackandpower.
NOTE: 0D1 may appear after the above selected part numbers on yours sales order if factory integration is indicated.
Rack Baying Kits
HPE G2 Rack Baying Kit (Recommended)
P9L12A
NOTE: This Baying Kit is used to connect HPE G2 racks of the same U height and
depth together and includes the following components: (4) 24
-inch baying
brackets, (4) 600mm baying brackets, and T-30 Torx screws.
HPE G2 Advanced and Enterprise Series Rack 1075mm and 1200mm Offset Baying
Kit (Extended)
P9L19A
HPE 47U to 48U Rack Baying Kit (Extended)
Q7G16A
Airflow Optimization
HPE Air Flow Optimization Kit (Recommended)
BW930A
NOTE: The Airflow Optimization kit seals air gaps inside the rack, in between
bayed racks, and the clearance from the floor to the rack to prevent hot and cold
air from mixing thus optimizing the temperature at which the chilled air enters the
racked servers.
NOTE:
When configuring racks through Factory Express, a Rack Optimization kit
will automatically ship with the rack. This kit is recommended for all other bayed
rack configurations also.
Sidewall Panel Kits
HPE G2 Rack 42U 1075mm Side Panel Kit (Recommended)
P9L15A
HPE G2 Rack 42U 1200mm Side Panel Kit (Recommended)
P9L16A
HPE G2 Rack 48U 1075mm Side Panel Kit (Extended)
P9L17A
HPE G2 Rack 48U 1200mm Side Panel Kit (Extended)
P9L18A
NOTE: HPE G2 Rack Side Panel Kits are locking, 2-piece panels that provide
coverage for both sides of the rack.
NOTE:
All HPE G2 Advanced Series Racks ship with a complete set of side panels.
Rack Stabilization
Kits
HPE 600mm Rack Stabilizer Kit (Recommended)
BW932A
HPE 600mm Heavy Duty V2 Stabilizer Kit (Extended)
BW961A
HPE 800mm Rack Stabilizer Kit (Extended)
BW933A
NOTE: Anti-tip stabilizer kits provide stability and support when equipment is
installed, removed or accessed within the rack. Heavy Duty stabilizer kits should be
used when a single racked component exceeds 200 lbs.
HPE 9000 and 10000 Rack Ballast Kit (Recommended)
120672-B21
NOTE: The Ballast Kit is designed to provide additional stability and support when
used with the Stabilizer Kit. It is typically used when very heavy equipment is
routinely installed, removed or
accessed within the rack. Compatible with HPE
Advanced and Enterprise Series racks.
Tie Down Kit
HPE Advanced Series Rack Tie Down Kit (Extended)
AF076A
NOTE: The Rack Tie Down Kit is used to secure the rack to the datacenter floor.
Part number AF076A is used for 600mm wide racks only.
Universal 1U
Filler Panels
HPE 1U 10-pack Black Universal Filler Panel (Recommended)
BW928A
HPE 1U 100-pack Black Universal Filler Panel (Recommended)
BW929A