User Manual
Table Of Contents
- HPE ProLiant DL380 Gen10 Server User Guide
- Contents
- Component identification
- Operations
- Powering up the server
- Power down the server
- Extend the server from the rack
- Extending the server from the rack
- Removing the server from the rack
- Installing the server into the rack
- Remove the access panel
- Installing the access panel
- Removing the fan cage
- Installing the fan cage
- Removing the air baffle or midplane drive cage
- Installing the air baffle
- Removing a riser cage
- Removing a riser slot blank
- Removing the hard drive blank
- Releasing the cable management arm
- Accessing the Systems Insight Display
- Setup
- Hardware options installation
- Product QuickSpecs
- Introduction
- Installing the bezel and bezel lock
- Power supply options
- Drive options
- Fan options
- Memory options
- Controller options
- Installing a Universal Media Bay
- Drive cage options
- Installing a front 8NVMe SSD Express Bay drive cage
- Installing a front 6SFF SAS/SATA + 2NVMe Premium drive cage
- Installing a front 8SFF SAS/SATA drive cage in box 1
- Installing a front 8SFF SAS/SATA drive cage in box 2
- Installing a front 2SFF NVMe/SAS/SATA Premium drive cage
- Installing a midplane 4LFF SAS/SATA drive cage
- Installing a rear 2SFF SAS/SATA drive cage in the primary or secondary riser
- Installing a rear 2SFF SAS/SATA drive cage over the power supplies
- Installing a rear 3LFF SAS/SATA drive cage
- Riser and riser cage options
- Expansion slots
- Installing an intrusion detection switch
- Installing a Smart Storage Battery
- Installing a rear serial port interface
- Installing a Systems Insight Display
- Installing a FlexibleLOM adapter
- Installing a 1U or high-performance heatsink
- Installing a processor
- HPE Trusted Platform Module 2.0 Gen10 Option
- Cabling
- HPE ProLiant Gen10 DL Servers Storage Cabling Guidelines
- Cabling diagrams
- Cable routing: Front 2SFF drive option for SFF
- Cable routing: Front 2SFF drive option for LFF
- Cable routing: Front 2SFF drive options (3 position cable)
- Cable routing: Front 8SFF drive options
- Cable routing: Front 8SFF NVMe/SAS premium drive option
- Cable routing: Front 8SFF NVMe drive options
- Cable routing: Front 2SFF NVMe drive option for SFF
- Cable routing: Front 2SFF NVMe drive option for LFF
- Cable routing: Midplane 4LFF drive option
- Cable routing: Rear 3LFF drive option
- Cable routing: Rear 2SFF drive options
- Cable routing: HPE 12G SAS Expander to a controller
- Cable routing: Systems Insight Display
- Software and configuration utilities
- Server mode
- Product QuickSpecs
- Active Health System Viewer
- HPE iLO 5
- Intelligent Provisioning
- Management Security
- Scripting Toolkit for Windows and Linux
- UEFI System Utilities
- HPE Smart Storage Administrator
- USB support
- Redundant ROM support
- Keeping the system current
- Troubleshooting
- Safety, warranty, and regulatory information
- Specifications
- Support and other resources
- Documentation feedback
Contents
Component identification........................................................................... 8
Front panel components......................................................................................................................8
Front panel LEDs and buttons...........................................................................................................10
UID button functionality...........................................................................................................14
Power fault LEDs....................................................................................................................14
Systems Insight Display LEDs................................................................................................14
Systems Insight Display combined LED descriptions.............................................................15
Rear panel components.................................................................................................................... 17
Rear panel LEDs............................................................................................................................... 18
System board components................................................................................................................19
System maintenance switch descriptions............................................................................... 20
Processor, heatsink, and socket components................................................................................... 21
Drives................................................................................................................................................ 21
SAS/SATA drive components and LEDs.................................................................................22
NVMe drive components and LEDs........................................................................................23
uFF drive components and LEDs........................................................................................... 23
Fan bay numbering............................................................................................................................24
Drive box identification...................................................................................................................... 25
Drive bay numbering......................................................................................................................... 26
Drive bay numbering: Smart Array controller..........................................................................26
Drive bay numbering: SAS expander..................................................................................... 28
Drive bay numbering: NVMe drives........................................................................................ 30
uFF drive bay numbering........................................................................................................31
Operations..................................................................................................32
Powering up the server......................................................................................................................32
Power down the server .....................................................................................................................32
Extend the server from the rack........................................................................................................ 32
Extending the server from the rack....................................................................................................33
Removing the server from the rack................................................................................................... 34
Installing the server into the rack.......................................................................................................34
Remove the access panel................................................................................................................. 36
Installing the access panel................................................................................................................ 36
Removing the fan cage......................................................................................................................36
Installing the fan cage........................................................................................................................37
Removing the air baffle or midplane drive cage................................................................................ 37
Installing the air baffle........................................................................................................................39
Removing a riser cage.......................................................................................................................40
Removing a riser slot blank............................................................................................................... 41
Removing the hard drive blank..........................................................................................................41
Releasing the cable management arm .............................................................................................42
Accessing the Systems Insight Display.............................................................................................42
Setup...........................................................................................................44
HPE support services........................................................................................................................44
Setup overview..................................................................................................................................44
Operational requirements....................................................................................................... 44
Space and airflow requirements.................................................................................. 44
Contents 3