User Manual
Table Of Contents
- HPE ProLiant DL380 Gen10 Server User Guide
- Contents
- Component identification
- Operations
- Powering up the server
- Power down the server
- Extend the server from the rack
- Extending the server from the rack
- Removing the server from the rack
- Installing the server into the rack
- Remove the access panel
- Installing the access panel
- Removing the fan cage
- Installing the fan cage
- Removing the air baffle or midplane drive cage
- Installing the air baffle
- Removing a riser cage
- Removing a riser slot blank
- Removing the hard drive blank
- Releasing the cable management arm
- Accessing the Systems Insight Display
- Setup
- Hardware options installation
- Product QuickSpecs
- Introduction
- Installing the bezel and bezel lock
- Power supply options
- Drive options
- Fan options
- Memory options
- Controller options
- Installing a Universal Media Bay
- Drive cage options
- Installing a front 8NVMe SSD Express Bay drive cage
- Installing a front 6SFF SAS/SATA + 2NVMe Premium drive cage
- Installing a front 8SFF SAS/SATA drive cage in box 1
- Installing a front 8SFF SAS/SATA drive cage in box 2
- Installing a front 2SFF NVMe/SAS/SATA Premium drive cage
- Installing a midplane 4LFF SAS/SATA drive cage
- Installing a rear 2SFF SAS/SATA drive cage in the primary or secondary riser
- Installing a rear 2SFF SAS/SATA drive cage over the power supplies
- Installing a rear 3LFF SAS/SATA drive cage
- Riser and riser cage options
- Expansion slots
- Installing an intrusion detection switch
- Installing a Smart Storage Battery
- Installing a rear serial port interface
- Installing a Systems Insight Display
- Installing a FlexibleLOM adapter
- Installing a 1U or high-performance heatsink
- Installing a processor
- HPE Trusted Platform Module 2.0 Gen10 Option
- Cabling
- HPE ProLiant Gen10 DL Servers Storage Cabling Guidelines
- Cabling diagrams
- Cable routing: Front 2SFF drive option for SFF
- Cable routing: Front 2SFF drive option for LFF
- Cable routing: Front 2SFF drive options (3 position cable)
- Cable routing: Front 8SFF drive options
- Cable routing: Front 8SFF NVMe/SAS premium drive option
- Cable routing: Front 8SFF NVMe drive options
- Cable routing: Front 2SFF NVMe drive option for SFF
- Cable routing: Front 2SFF NVMe drive option for LFF
- Cable routing: Midplane 4LFF drive option
- Cable routing: Rear 3LFF drive option
- Cable routing: Rear 2SFF drive options
- Cable routing: HPE 12G SAS Expander to a controller
- Cable routing: Systems Insight Display
- Software and configuration utilities
- Server mode
- Product QuickSpecs
- Active Health System Viewer
- HPE iLO 5
- Intelligent Provisioning
- Management Security
- Scripting Toolkit for Windows and Linux
- UEFI System Utilities
- HPE Smart Storage Administrator
- USB support
- Redundant ROM support
- Keeping the system current
- Troubleshooting
- Safety, warranty, and regulatory information
- Specifications
- Support and other resources
- Documentation feedback
• SFF drive (1)
• Drive blanks (7)
• Drive bay blanks for bays 1 and 2 (2)
• Fan assemblies (4)
• Fan blanks (2)
• Standard heatsink (1)
• 1P air baffle (1)
• X8 HPE Flexible Smart Array Controller (1)
• Primary riser cage (1)
• Secondary riser cage blank (1)
• Power supply (1)
• Power supply blank (1)
• Cables for the above components
The LFF configuration includes the following components:
• LFF drives (12)
• Fan assemblies (6)
• SE heatsinks (2)
• 2P air baffle (1)
• X8 HPE Flexible Smart Array Controller (1)
• Primary riser cage (1)
• Secondary riser cage (1)
• Power supplies (2)
• Cables for the above components
The 12 LFF configuration does not contain a rear three-bay LFF drive cage option.
Power supply specifications
Depending on the installed options, the server can be configured with one of the following power supplies:
• HPE 500W Flex Slot Platinum Hot-plug Power Supply
• HPE 800W Flex Slot Platinum Hot-plug Power Supply
• HPE 800W Flex Slot Titanium Plus Hot-plug Power Supply
• HPE 800W Flex Slot Universal Hot-plug Power Supply
• HPE 800W Flex Slot -48VDC Hot-plug Power Supply
• HPE 1600W Flex Slot Platinum Plus Hot-plug Power Supply
For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard Enterprise website.
HPE 500W Flex Slot Platinum Hot-plug Power Supply
Specification Value
Input requirements
Rated input voltage
100 to 127 VAC
200 to 240 VAC
240 VDC for China only
Table Continued
148 Power supply specifications