User Manual
Table Of Contents
- HPE ProLiant DL380 Gen10 Server User Guide
- Contents
- Component identification
- Operations
- Powering up the server
- Power down the server
- Extend the server from the rack
- Extending the server from the rack
- Removing the server from the rack
- Installing the server into the rack
- Remove the access panel
- Installing the access panel
- Removing the fan cage
- Installing the fan cage
- Removing the air baffle or midplane drive cage
- Installing the air baffle
- Removing a riser cage
- Removing a riser slot blank
- Removing the hard drive blank
- Releasing the cable management arm
- Accessing the Systems Insight Display
- Setup
- Hardware options installation
- Product QuickSpecs
- Introduction
- Installing the bezel and bezel lock
- Power supply options
- Drive options
- Fan options
- Memory options
- Controller options
- Installing a Universal Media Bay
- Drive cage options
- Installing a front 8NVMe SSD Express Bay drive cage
- Installing a front 6SFF SAS/SATA + 2NVMe Premium drive cage
- Installing a front 8SFF SAS/SATA drive cage in box 1
- Installing a front 8SFF SAS/SATA drive cage in box 2
- Installing a front 2SFF NVMe/SAS/SATA Premium drive cage
- Installing a midplane 4LFF SAS/SATA drive cage
- Installing a rear 2SFF SAS/SATA drive cage in the primary or secondary riser
- Installing a rear 2SFF SAS/SATA drive cage over the power supplies
- Installing a rear 3LFF SAS/SATA drive cage
- Riser and riser cage options
- Expansion slots
- Installing an intrusion detection switch
- Installing a Smart Storage Battery
- Installing a rear serial port interface
- Installing a Systems Insight Display
- Installing a FlexibleLOM adapter
- Installing a 1U or high-performance heatsink
- Installing a processor
- HPE Trusted Platform Module 2.0 Gen10 Option
- Cabling
- HPE ProLiant Gen10 DL Servers Storage Cabling Guidelines
- Cabling diagrams
- Cable routing: Front 2SFF drive option for SFF
- Cable routing: Front 2SFF drive option for LFF
- Cable routing: Front 2SFF drive options (3 position cable)
- Cable routing: Front 8SFF drive options
- Cable routing: Front 8SFF NVMe/SAS premium drive option
- Cable routing: Front 8SFF NVMe drive options
- Cable routing: Front 2SFF NVMe drive option for SFF
- Cable routing: Front 2SFF NVMe drive option for LFF
- Cable routing: Midplane 4LFF drive option
- Cable routing: Rear 3LFF drive option
- Cable routing: Rear 2SFF drive options
- Cable routing: HPE 12G SAS Expander to a controller
- Cable routing: Systems Insight Display
- Software and configuration utilities
- Server mode
- Product QuickSpecs
- Active Health System Viewer
- HPE iLO 5
- Intelligent Provisioning
- Management Security
- Scripting Toolkit for Windows and Linux
- UEFI System Utilities
- HPE Smart Storage Administrator
- USB support
- Redundant ROM support
- Keeping the system current
- Troubleshooting
- Safety, warranty, and regulatory information
- Specifications
- Support and other resources
- Documentation feedback
SUM overview
SUM is a tool for firmware and driver maintenance on ProLiant servers, BladeSystem enclosures, Moonshot
systems, and other nodes. It provides a browser-based GUI or a command-line scripting interface for flexibility
and adaptability.
SUM identifies associated nodes you can update at the same time to avoid interdependency issues.
Key features of SUM include:
• Discovery engine that finds installed versions of hardware, firmware, and software on nodes.
• SUM deploys updates in the correct order and ensures that all dependencies are met before deploying an
update.
• Interdependency checking.
• Automatic and step-by-step localhost Guided Update process.
• Web browser-based mode.
• Ability to create custom baselines and ISOs.
• Support for iLO Repository.
• Simultaneous firmware and software deployment for multiple remote nodes.
• Local offline firmware deployments with SPP deliverables.
• Remote offline deployment when used with the Scripting Toolkit (ProLiant Gen8 and later) servers,
Scripting Toolkit (ProLiant Gen9), RESTful Interface Tool (Gen10), iLO Virtual Media, or PXE booted
media.
• Extensive logging in all modes.
NOTE:
SUM does not support third-party controllers, including flashing hard drives behind the controllers.
iSUT overview
Integrated Smart Update Tools is a software utility used with iLO 5, HPE OneView, iLO Amplifier Pack,
Service Pack for ProLiant (SPP), and Smart Update Manager (SUM) to stage, install, and activate firmware
and driver updates.
NOTE:
HPE OneView and iLO Amplifier Pack manage the iLO while iSUT runs on each server and deploys the
updates. The same administrator might not manage both applications. Create a process that notifies the
administrators when updates are available.
• Integrated Smart Update Tools: Polls an iLO5, HPE OneView, or iLO Amplifier Pack for updates through
the management network and orchestrates staging, deploying, and activating updates. You can adjust the
polling interval by issuing the appropriate command-line option provided by iSUT. Performs inventory on
target servers, stages deployment, deploys updates, and then reboots the servers.
• iLO 5 with integrated Smart Update: Loads Install Sets to the iLO Repository on iLO 5 nodes. iSUT
deploys OS-based updates from the iLO Repository.
• iLO Amplifier Pack: Displays available updates for servers. Communicates with iSUT to initiate updates,
reports the status to iLO Amplifier Pack.
• HPE OneView: Displays available updates for servers. Communicates with iSUT to initiate updates,
reports the status on the Firmware section of the Server Profile page of HPE OneView. HPE OneView
provides automated compliance reporting in the dashboard.
• SPP: A comprehensive systems software and firmware update solution, which is delivered as a single ISO
image.
• SUM: A tool for firmware and driver maintenance for HPE ProLiant servers and associated options.
140 Software and configuration utilities