ProLiant DL380 Gen10 Server

QuickSpecs
HPE ProLiant DL380 Gen10 Server
Standard Features
Page 9
Internal Storage Devices
One of the following depending on model
Optical Drive
Ships standard in Performance Models
Optional: DVD-ROM, DVD-RW
Hard Drives
None ship standard
Maximum Internal Storage
CAPACITY
CONFIGURATION
Hot Plug SFF SAS
72.0 TB
24+6 x 2.4 TB* (with optional rear SFF drive cage)
Hot Plug SFF SATA
60.0 TB
24+6 x 7.68 TB (with optional SFF drive cage)
Hot Plug LFF SAS
231.84 TB
12+4+3 x 12 TB + 2 x 3.84 TB (with optional mid –tray and
rear LFF drive cage, plus 2 SFF SSD rear)
Hot Plug LFF SATA
197.68 TB
12+4+3 x 10 TB + 2 x 3.84 TB (with optional mid –tray and
rear LFF drive cage, plus 2 SFF SSD rear)
Hot Plug SFF SAS SSD
459 TB
24+6 x 15.3 TB (with optional rear SFF drive cage)
Hot Plug LFF SATA SSD
44.16 TB
12+4+3 x 1.92 TB + 2 x 3.84 TB (with optional mid –tray
and rear LFF drive cage, plus 2 SFF SSD rear)
Hot Plug SFF NVMe PCIe SSD
80 TB NVMe
20 x4 TB NVMe
NOTE: 2x m.2 drives are supported on the Primary Riser.
NOTE: uFF drives are also supported.
Power Supply
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94% efficiency.
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94% and 96% efficiency.
NOTE:
Also available in -48VDC and 227VAC/380VDC power inputs.
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94% efficiency.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less
installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation
and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This
flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included
with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables
web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
For information on power specifications and technical content visit HPE Server power supplies.
Interfaces
Serial
Optional, rear
Display Port
1 (SFF 1 front, optional via Universal Media Bay, 826708-B21), 8 LFF chassis standard
FlexibleLOM Network Ports
4 x 1 Gb ports shipping standard with optional FlexibleLOM or stand up card
HPE iLO Remote
Management Network Port
1 Gb Dedicated