ProLiant DL380 Gen10 Server

QuickSpecs
HPE ProLiant DL380 Gen10 Server
Standard Features
Page 8
Memory Protection
For details on the HPE Server Memory Options RAS feature, visit: http://www.hpe.com/docs/memory-ras-feature
.
Expansion Slots
Slots #
Technology
Bus
Width
Connector
Width
Slot Form Factor
Notes
1
PCIe 3.0
X8
X8
Full-height,
full-length slot
Proc 1
2
PCIe 3.0
X16
X16
Full-height,
full-length slot
Proc 1
3
PCIe 3.0
X8
X8
Full-height,
half-length slot
Proc 1
NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.
NOTE: This riser also supports dual m.2 cards.
Slots #
Technology
Bus
Width
Connector
Width
Slot Form Factor
Notes
1
PCIe 3.0
X8
X8
Full-height,
full-length slot
Proc 2
2
PCIe 3.0
X16
X16
Full-height,
full-length slot
Proc 2
3
PCIe 3.0
X8
X8
Full-height,
half-length slot
Proc 2
Storage Controllers
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed
breakout of the available Gen10 Smart Array controllers visit the
HPE Smart Array Gen10 Controllers Data Sheet.
One of the following depending on model
Software RAID
HPE Smart Array S100i SR Gen10 SW RAID
NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional
controller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.
NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled.
NOTE: The S100i uses 14 embedded SATA ports, but only 12 ports are accessible as 2 are leveraged to support the 2 M.2
options on the primary riser.
NOTE: The S100i supports windows only
NOTE: For Linux users, HPE offers a solution that uses in-distro open-source software to create a two-disk RAID 1 boot
volume. For more information visit:
https://downloads.linux.hpe.com/SDR/project/lsrrb/
Essential RAID Controller
HPE Smart Array E208i-a SR Gen10 Controller
HPE Smart Array E208i-p SR Gen10 Controller
HPE Smart Array E208e-p SR Gen10 Controller
Performance RAID
Controller
HPE Smart Array P408i-a SR Gen10 Controller
HPE Smart Array P408i-p SR Gen10 Controller
HPE Smart Array P408e-p SR Gen10 Controller
HPE Smart Array P816i-a SR Gen10 Controller
NOTE: Performance RAID Controllers require the HPE Smart Storage Battery (P01366-B21) which is sold separately.