ProLiant DL380 Gen10 Server

QuickSpecs
HPE ProLiant DL380 Gen10 Server
Configuration Information
- Factory Integrated Models
Page 30
Step 3: Choose Additional Factory Integratable Options
One of the following from each list may be selected if desired at time of factory integration
HPE Security Options
HPE Trusted Platform Module 2.0 Gen10 Option (Recommended)
864279-B21
NOTE: HPE Trusted Platform Module 2.0 option works with Gen10 servers with UEFI Mode not Legacy
Mode. It is not compatible with HPE ProLiant Gen8 servers or earlier generation variants.
NOTE: HPE server systems can have a TPM module (of any type) installed only once. It cannot be replaced
with any other TPM module.
HPE Special Enablement Kits
872108-B21
NOTE: TPM 2.0 is set as default, for 1.2 TPM setting instead, please select this option.
HPE Special Request/Equipment Logistic Service
758959-B22
NOTE:
UEFI is the default, this FIO part can be used for CTO to enable Legacy mode.
HPE Unique Options - Recommended
HPE DL38X Gen10 Slot 1/2 x16/x16 FIO Riser Kit (Recommended)
871674-B21
NOTE: Slot 1 or 2 in Primary location.
NOTE: Supports Full Height and Full length cards.
NOTE: Bus width x16, x16, Connector Width x16, x16.
HPE DL38X Gen10 x16/x16 GPU Slot2/3 FIO Riser Kit (Recommended)
871676-B21
NOTE: Primary Riser, Connector in slot 2 & 3 for GPU support.
NOTE: Supports Full Height and Full length cards.
NOTE:
Bus width x16, x16, Connector Width x16, x16.
HPE 4 NVMe Box 1 Instr Spec FIO
878186-B21
HPE DL38X Gen10 x8/x8/x8 1-port 2 NVMe Slim SAS FIO Riser Kit (Recommended)
871673-B21
NOTE: Supports 3x 8 and 1-port for NVMe.
NOTE: Supports Full Height and half-length cards.
NOTE: Bus width x8, x8, x8 Connector Width x8, x8, x8.
HPE 2 NVMe Instr Spec FIO
878189-B21
NOTE: This is a factory integrated only option.
NOTE: This will connect 2 SFF cage installed in the front of the chassis to NVMe.
HPE Special Enablement Kits
878192-B21
NOTE: This is a factory integrated only option.
NOTE:
Indicates the cage will also have an NVMe connection.
HPE 8SFF Front Remove SPEC Perf FIO
873763-B21
NOTE: This is a factory integrated only option.
NOTE: Will remove the Primary 8SFF cage in Box 3 of the 8SFF and replace with a Box blank.
HPE Riser Remove SPEC FIO
873766-B21
NOTE: This is a factory integrated only option.
NOTE: Will remove the Primary shipping PCIe riser.
HPE Special Request/Equipment Logistic Service
758959-B22
NOTE: UEFI is the default, this FIO part can be used for CTO to enable Legacy mode.
HPE Memory Fast Fault Tolerance FIO Kit
875293-B21
NOTE: Fast Fault Tolerance is a new feature in Gen10 server memory that enables the system to boot with
full memory performance while monitoring for DRAM device failures.
HPE Unique Options - Extended
HPE 2U Bezel Air Filter NEBS-compliant Kit (Extended)
P05420-B21
HPE Converged Infrastructure Management Software
HPE OneView for ProLiant DL Server including 3yr 24x7 Support FIO Bundle Physical 1-server LTU
E5Y43A