ProLiant DL380 Gen10 Server

QuickSpecs
HPE ProLiant DL380 Gen10 Server
Configuration Information
- Factory Integrated Models
Page 29
Registered DIMMs (RDIMMs) - Extended
HPE 8GB (1x8GB) Dual Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit (Extended)
876181-B21
Load Reduced DIMMs (LRDIMMs) - Recommended
HPE 64GB (1x64GB) Quad Rank x4 DDR4-2666 CAS-19-19-19 Load Reduced Smart Memory Kit
(Recommended)
815101-B21
Load Reduced DIMMs (LRDIMMs) - Extended
HPE 128GB (1x128GB) Octal Rank x4 DDR4-2666 CAS-22-19-19 3DS Load Reduced Memory Kit
(Extended)
815102-B21
HPE Persistent Memory (NVDIMM) - Recommended
HPE 16GB NVDIMM Single Rank x4 DDR4-2666 Module Kit (Recommended)
845264-B21
NOTE: A maximum of 12 NVDIMMs supported.
NOTE: Can only be mixed with RDIMMs.
NOTE: For General Server Memory and NVDIMM Population Rules and Guidelines for Gen10 see details
here: http://www.hpe.com/docs/memory-population-rules
HPE Scalable Persistent Memory - Recommended
NOTE: Scalable Persistent Memory is available as HPE Factory Configure To Order only
For details on HPE Scalable Persistent Memory please go to: http://www.hpe.com/info/persistentmemory
NOTE: Scalable Persistent Memory requires dedicated flash backup. The 1.6TB NVME MU SFF
(Recommended) (877994-B21) drive is required, with respective drive cages and associated options
(Enablement kit, riser and Fan kit) and must be installed in Box 3. A Qty of 2 are required for the 256GB
and 4 required for the 512GB installation.
NOTE: Scalable Persistent Memory requires Back up power and the 800W PSU/400w BBU (Extended)
(827608-B21) needs to be selected.
NOTE: Support for Scalable Persistent Memory is limited to 25C inlet ambient temperature.
HPE Scalable Persistent Memory 256GB FIO for 2-socket Servers (Recommended)
876401-B21
NOTE: Includes 384GB of total memory (256GB for Scalable PMEM and 128GB for server memory) using
either (24) 16GB or (12) 32GB DIMMs.
NOTE: 128GB is minimum server memory for this solution. Additional server memory can be added if using
32GB DIMMs in this configuration.
HPE Scalable Persistent Memory 512GB FIO for 2-socket Servers (Recommended)
876402-B21
NOTE: Includes 768GB of total memory (512GB for Scalable PMEM and 256GB for server memory) using
either (24) 32GB or (12) 64GB DIMMs.
NOTE: 256GB is minimum server memory for this solution. Additional server memory can be added if using
64GB DIMMs in this configuration.
HPE Scalable Persistent Memory - Extended
HPE Scalable Persistent Memory 800W Flex Slot PSU and 400W BBU 2-pack FIO Kit (Extended)
827608-B21
NOTE: Is required for all Scalable Persistent Memory installations.
Step 2c: Choose Power Supplies
Select one or two power supplies from below.
NOTE: Mixing of 2 different power supplies is NOT allowed.
HPE Flex Slot Power Supplies - Recommended
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit (Recommended)
865408-B21
HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (Recommended)
865438-B21
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit (Recommended)
865414-B21
HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit (Recommended)
865434-B21
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit (Recommended)
830272-B21
HPE Flex Slot Power Supplies - Extended
HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit (Extended)
865428-B21