ProLiant DL380 Gen10 Server

QuickSpecs
HPE ProLiant DL380 Gen10 Server
Configuration Information
- Factory Integrated Models
Page 25
Recommended
Offering the best combination of performance, value and availability, Recommended Options have been selected by HPE experts
to provide the right technology for a range of workloads and market segments. Fully integrated into the ProLiant management
and security experience, Recommended Options provide the best fit with timely availability.
Extended
Extended Options provide an extended catalog of products tailored for customers in specific markets or with specific workloads,
requiring the utmost in performance or value. Fully integrated into the ProLiant management and security experience, Extended
Options represent great value and performance but typically have a longer lead-time.
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales
representative for information on configurable product offerings and requirements.
1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.
Step 1: Base Configuration (choose one of the following configurable models)
CTO Server
HPE ProLiant DL380
Gen10 8 LFF CTO Server
HPE ProLiant DL380
Gen10 12 LFF CTO
Server
HPE ProLiant DL380
Gen10 8 SFF CTO Server
HPE ProLiant DL380
Gen10 24 SFF CTO
Server
SKU Number
868706-B21
868705-B21
868703-B21
868704-B21
TAA SKU
875784-B21
875785-B21
875782-B21
875783-B21
Processor
Not included as standard
Not included as standard
Not included as standard
Not included as standard
DIMM Slots
24-DIMM slots
24-DIMM slots
24-DIMM slots
24-DIMM slots
Storage
Controller
Embedded SW RAID with 14 SATA ports (12-ports accessible), choice of HPE modular Smart Array and PCIe
plug-in controller
PCIe
Three standard in primary riser (with dual M.2 support)
Drive Cage -
included
8 LFF 12 LFF 8 SFF 24 SFF
Network
Controller
HPE 1Gb Ethernet 4-Port 331i Adapter plus optional HPE FlexibleLOM or stand up card
Fans
6-Standard
6-High Performance
4-Standard
6-Performance
Management
HPE iLO with Intelligent Provisioning (standard), iLO Advances and OneView (optional)
USB
1x 3.0 standard plus iLo
front service port
None as standard
1x 3.0 standard plus iLo
front service port
1x 3.0 standard plus iLo
front service port
NOTE: HPE offers multiple Trade Agreement Act (TAA) compliant configurations to meet the needs of US Federal
Government customers. These products are either manufactured or substantially transformed in a designated country.
TAA
compliance is only provided when HPE options are included as part of factory integrated orders (CTO).
NOTE: TAA chassis are only orderable in North America and Canada.
NOTE: The HPE ProLiant DL380 Gen10 12 LFF CTO Server ships with the cable required for the P816i-a installation.
NOTE: All CTO servers are Energy Star 2.1 compliant.