ProLiant DL380 Gen10 Carrier Grade Server

QuickSpecs
HPE ProLiant DL380 Gen10 Carrier Grade Supplement
Core Options
Page 8
HPE I/O Expansion Options
NOTE: The Primary Riser shipping default in the chassis is a x8 FH, FL, x16 FH, FL and x8 FH, HL with m.2
support.
NOTE: For a Secondary/Tertiary riser the second processor is required.
NOTE: Primary Riser Slot 1.
NOTE: Supports Full Height and Full length cards.
NOTE: Bus width x8 x16, x8, Connector Width x16, x16, x8.
NOTE: M.2 support on this riser.
NOTE: Supports Full Height, Half- length cards; Full Height, Full-length cards and Full Height, Half- length
cards.
NOTE: Bus width x8, x16, x8, Connector Width x8, x16, x8.
HPE DL38X Gen10 x8/x16/x8 PCIe NEBS Riser Kit
873209-B21
NOTE: Secondary Riser.
NOTE: Supports Full Height and Full length cards.
NOTE: Bus width x8, x16, x8.
HPE DL380 Gen10 x16 Tertiary NEBS Riser
826702-B21
NOTE: Supports 1x 16 slot in the Tertiary location.
NOTE: Full Height and full-length card.
NOTE: Bus width x16 Connector Width x16.
Riser Information
NEBS
Compliant
Part number
Description
Commercial
Part number
Riser position
Bus width (Gen3 lanes)
Primary Secondary Tertiary
Top
slot
Middle
Slot
Bottom
slot
826701-B21
HPE DL380 Gen10 x8 x16 x8 M.2
NEBS Riser
826694-B21
O N N X16 X16 X8
873209-B21
HPE DL38X Gen10 x8 x16 x8
NEBS Riser
870548-B21
O O N X8 X16 X8
826702-B21
HPE DL380 Gen10 x16 Tertiary
NEBS Riser
826700-B21
N N O X16 0 0
HPE Power Supplies
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
865414-B21
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard
C-14 power inlet connector.
HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit
865434-B21
NOTE: Flex Slot -48VDC power supplies support power efficiency of up to 94%.
HPE 48VDC 2.85m Power Cable
Q0H80A
HPE Cooling Options
HPE DL38X Gen10 High Performance Temperature Fan Kit
867810-B21
NOTE: This kit is required for specific Ambient temperature environments, coming in 2H2017.
NOTE: High Performance fan kit consists of 6 fans, these will need to replace all the standard fans in the
unit, and fill all 6 fan cages.
NOTE: For elevated ambient temperature support please see: http://www.hpe.com/servers/ashrae.