User Manual

QuickSpecs
HPE MSA 1040 Storage
Family Information
Page 7
MSA 1040
Capacity
Single Enclosure and
Maximum Additional Drive
Enclosures
LFF:
120 TB (single LFF array-head -using 12 x 10TB LFF SAS MDL drives)
480 TB (by adding 3 LFF Disk Enclosures behind LFF Array & using 10 TB LFF SAS MDL drives)
SFF:
43.2 TB (single SFF array-head - using 24 x 1.8TB SFF SAS drives)
178.2 TB (by adding 3 SFF Disk Enclosures behind SFF Array & using 1.8TB SFF SAS drives)
NOTE: 1) maximum available storage capacity depends on the RAID level being implemented
Pool Capacity
GL200: 169 TB (154 TiB)
GL210: 219 TB (200 TiB)
GL220: 329 TB (300 TiB)
GL220 with Large Pool Support: 562 TB (512 TiB)
NOTE: 1) The above pool capacities by firmware release apply to virtual storage only
2) The above capacities are usable capacity/pool. Each MSA system can support two pools.
Therefore each MSA storage system can have double the usable capacity listed above
Cache
6 GB per controller
NOTE: 6GB cache includes Data (Read/Write) cache = 4GB and Metadata and System OS cache =
2GB
Total LUNs
(
LUN size are dependent
of
the storage
architecture: Linear vs.
Virtualized)
512
maximum LUN size: 140TB (128TiB)
Thin Provisioning allows you to create the LUNs independent of the physical storage
Host Interconnect
2 x 8Gb Fibre Channel ports per controller
2 x 1GbE RJ-45 ports per controller
2 x 10GbE ports per controller
2x 12Gb SAS ports per controller
Maximum Drives
w/ 3 expansion
48 LFF/99 SFF
Maximum Host
Supported
64 in v2 UI
512 in v3 UI
Standard Software
Snapshots (64)
Optional Software
Remote Snap (linear storage only)
Max Snapshot (512)
Product Technology
MSA 1040 Models
MSA 1040 Storage offers 4 factory configured models:
MSA 1040 8Gb FC with 2-ports per controller
MSA 1040 12Gb SAS with 2-ports per controller
MSA 1040 1GbE iSCSI with 2-ports per controller
MSA 1040 10GbE iSCSI with 2-ports per controller
Modular Chassis
2U rack height. 12 Large Form Factor or 24 Small Form Factor drive bays, accommodating SAS and
SAS MDL Drives
Optional Disk Enclosures
Users have a choice of chassis for the array head between LFF and SFF drives. Additionally, users can
choose between disk enclosures accommodating either drive sizes. Both the MSA 2040 disk enclosure
and the D2700 disk enclosure can be hot-added to an operating array.