User Manual

QuickSpecs
HPE MSA 1040 Storage
Configuration Information
Page 27
Cisco MDS 8/12c Fabric Switch for HP BladeSystem c-Class
AW563A
Cisco MDS 8/24c Fabric Switch for HP BladeSystem c-Class
AW564A
PremierFlexOM4 type
cables
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
QK732A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
QK733A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QK734A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
QK735A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
QK736A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK737A
OM3 FC LC-LC cables
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
AJ833A
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
AJ834A
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
AJ835A
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
AJ836A
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
AJ837A
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
AJ838A
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
AJ839A
Supported options
Mini-SAS HD to Mini-SAS Fanout Cables
HP Mini SAS High Density to Dual 2-lane Mini SAS External Fanout 1 Meter Cable
K2R02A
HP Mini SAS High Density to Dual 2-lane Mini SAS External Fanout 2 Meter Cable
K2R03A
HP Mini SAS High Density to Dual 2-lane Mini SAS External Fanout 4 Meter Cable
K2R04A
NOTE: Recommended to utilize Fanout cables when connecting to SAS HBAs for maximum
future flexibility without downtime. The Fanout cables are not supported on the MSA 2040
Mini-SAS HD to Mini-SAS HD Fanout Cables
HP Mini SAS High Density to Dual 2-lane Mini SAS High Density External Fanout 1 Meter
Cable
K2Q99A
HP Mini SAS High Density to Dual 2-lane Mini SAS High Density External Fanout 2 Meter
Cable
K2R00A
HP Mini SAS High Density to Dual 2-lane Mini SAS High Density External Fanout 4 Meter
Cable
K2R01A
NOTE: Recommended to utilize Fanout cables when connecting to SAS HBAs for maximum
future flexibility without downtime. The Fanout cables are not supported on the MSA 2040
Mini-SAS HD to Mini-SAS Cables
HP 1.0m External Mini SAS High Density to Mini SAS Cable
NOTE: This cable is used to connect 6Gb SAS initiator to MSA 2040 SAS controller. This is
not used for connecting to a disk enclosure.
716189-B21
HP 2.0m External Mini SAS High Density to Mini SAS Cable
716191-B21
HP 4.0m External Mini SAS High Density to Mini SAS Cable
716193-B21
NOTE: Recommended to utilize standard cable when connecting to Blade enclosure
switches
Mini-SAS HD to Mini-SAS HD Cables