User Manual

QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
Page
8
HPE OfficeConnect 1420 16G Switch (JH016A)
I/O ports and slots
16 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or
full; 1000BASE-T: full only
Supports a maximum of 16 autosensing 10/100/1000 ports
Physical characteristics
Dimensions
10.47(w) x 6.38(d) x 1.73(h) in (26.6 x 16.2 x 4.4 cm) (1U height)
Weight
2.65 lb (1.2 kg)
Memory and processor
1 MB flash; Packet buffer size: 512 KB
Mounting and enclosure
Mounts in an EIA standard 19-inch telco rack (hardware included); Wall, desktop and under-table
mounting
Performance
100 Mb Latency
< 8 µs (LIFO 64-byte packets)
1000 Mb Latency
< 16 µ
s (LIFO 64-byte packets)
Throughput
up to 23.8 Mpps (64-byte packets)
Switching capacity
32 Gbps
MAC address table size
8192 entries
Reliability
MTBF (years)
153.3
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
humidity
5% to 95%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude
up to 16,404 ft (5 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
Current
0.2 A
Maximum power rating
12 W
Notes
Maximum power rating and maximum heat dissipation are the worst
-
ca
se theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
This model provides internal power supply. Please select the correct
power cord country option.
Safety
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
Emissions
FCC Rules Part 15, Subpart B Class A
Immunity Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3