User Manual

QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessory Product Details
Page
30
• Jacket Color: Blue
• Jacket Material: Riser Grade
– Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
•
Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services
for details on the service-
level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HPE Premie
r Flex LC/LC
Multi-mode OM4 2 fiber
50m Cable (QK737A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter:
125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz
-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade
– Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Ca
ble, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenu
ation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455
-45
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services
for details on the service-
level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HPE X121 1G SFP LC SX
Transceiver
(J4858C)
A small form
-factor
pl
uggable (SFP) Gigabit
SX
transceiver that provides a
full
-
duplex Gigabit solution
up to 550 m on multimode
fiber.
Ports
1 LC 1000BASE-SX port; Duplex: full only
Physical characteristics
Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Electrical characteristics
Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W
Cabling
Type:
• 62.5/125
µ
m or 50/125
µ
m (core/cladding) diameter, graded-index,