User Manual

QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
Page
11
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude
up to 16,404 ft (5 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics
Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
Current
0.4 A
Maximum power rating
21 W
Notes
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
This model provides internal power supply. Please select the correct power
cord country option.
Safety
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
Emissions
FCC Rules Part 15, Subpart B Class A
Immunity
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Notes
Use only supported genuine HPE transceivers with your switch.
Services Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services
for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1420 24G PoE+ (124W) Switch (JH019A)
I/O ports and slots
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or
full; 1000BASE-T: full only
Supports a maximum of 24 autosensing 10/100/1000 ports
Physical characteristics
Dimensions
17.32(w) x 9.37(d) x 1.73(h) in (44 x 23.8 x 4.4 cm) (1U height)
Weight
7.28 lb (3.3 kg)
Memory and processor
1 MB flash; Packet buffer size: 512 KB