User Manual

Page 10
Data sheet
HPE OiceConnect 1920 Switch Series
Specifications (continued) HPE OiceConnect 192024G PoE+
(370W) Switch (JG926A)
HPE OiceConnect 192048G Switch
(JG927A)
HPE OiceConnect 192048G PoE+
(370W) Switch (JG928A)
I/O ports and slots 24 RJ-45 auto-negotiating 10/100/1000
PoE+ ports (IEEE 8023 Type 10BASE-T,
IEEE 8023u Type 100BASE-TX,
IEEE 8023ab Type 1000BASE-T,
IEEE 8023af PoE, IEEE 8023at)
4 SFP 100/1000 Mbps slots
(IEEE 8023u Type 100BASE-FX,
IEEE 8023z Type 1000BASE-X
Supports a maximum of 24
autosensing 10/100/1000 ports
plus 4 SFP 100/1000 slots
48 RJ-45 auto-negotiating 10/100/1000
ports (IEEE 8023 Type 10BASE-T,
IEEE 8023u Type 100BASE-TX,
IEEE 8023ab Type 1000BASE-T)
4 SFP 100/1000 Mbps slots
(IEEE 8023u Type 100BASE-FX,
IEEE 8023z Type 1000BASE-X
Supports a maximum of 48
autosensing 10/100/1000 ports
plus 4 SFP 100/1000 slots
48 RJ-45 auto-negotiating 10/100/1000
PoE+ ports (IEEE 8023 Type 10BASE-T,
IEEE 8023u Type 100BASE-TX,
IEEE 8023ab Type 1000BASE-T,
IEEE 8023af PoE, IEEE 8023at)
4 SFP 100/1000 Mbps slots
(IEEE 8023u Type 100BASE-FX,
IEEE 8023z Type 1000BASE-X
Supports a maximum of 48
autosensing 10/100/1000 ports
plus 4 SFP 100/1000 slots
Additional ports and slots 1 RJ-45 console port to access limited
CLI port
1 RJ-45 console port to access limited
CLI port
1 RJ-45 console port to access limited
CLI port
Physical characteristics
Dimensions
Weight
1732(w) x 1024(d) x 173(h) in
(44 x 26 x 44 cm) (1U height)
75 lb (34 kg)
1732(w) x 937(d) x 173(h) in
(44 x 238 x 44 cm) (1U height)
694 lb (315 kg)
1732(w) x 1732(d) x 173(h) in
(44 x 44 x 44 cm) (1U height)
948 lb (43 kg)
Memory and processor MIPS @ 500 MHz, 32 MB flash, 128 MB
SDRAM; packet buer size: 512 KB
MIPS @ 650 MHz, 32 MB flash, 128 MB
SDRAM; packet buer size: 15 MB
MIPS @ 650 MHz, 32 MB flash, 128 MB
SDRAM; packet buer size: 15 MB
Mounting and enclosure Mounts in an EIA standard 19-inch
telco rack or equipment cabinet
(hardware included)
Mounts in an EIA standard 19-inch
telco rack or equipment cabinet
(hardware included)
Mounts in an EIA standard 19-inch
telco rack or equipment cabinet
(hardware included)
Performance
100 Mb Latency
1000 Mb Latency
Throughput
Routing/Switching capacity
Routing table size
MAC address table size
< 5 µs
< 5 µs
up to 417 Mpps (64-byte packets)
56 Gbps
32 entries (IPv4), 32 entries (IPv6)
8192 entries
< 5 µs
< 5 µs
774 Mpps (64-byte packets)
104 Gbps
32 entries (IPv4), 32 entries (IPv6)
16384 entries
< 5 µs
< 5 µs
up to 774 Mpps (64-byte packets)
104 Gbps
32 entries (IPv4), 32 entries (IPv6)
16384 entries
Reliability
MTBF (years) 6578 7692 4444
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
Altitude
Acoustic
3F to 104°F (C to 40°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
10% to 95%, noncondensing
up to 16404 ft (5 km)
Low-speed fan: 449 dB, High-speed fan:
533 dB; ISO 7779
3F to 104°F (C to 40°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
10% to 95%, noncondensing
Pressure: 500 dB; ISO 7779
3F to 104°F (C to 40°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
10% to 95%, noncondensing
up to 16404 ft (5 km)
Low-speed fan: 47 dB, High-speed fan:
493 dB; ISO 7779