User Manual

QuickSpecs
HPE OfficeConnect 1820 Switch Series
Configuration
Page 9
Configuration Rules:
Note 1
The following Transceivers
install into this switch
HPE X121 1G SFP LC SX Transceiver
J4858C
HPE X121 1G SFP LC LX Transceiver
J4859C
HPE X111 100M SFP LC FX Transceiver
J9054C
HPE X121 1G SFP RJ45 T Transceiver
J8177C
Note 2
Localization (Wall Power Cord) require
d on orders without #B2B, #B2C (PDU Power Cord) . (See Localization
Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power Cable
option on the Switches/Routers.
Note 3
If this switch is factory instal
led in any HPE Racks, Then the J9583A#0D1 is required.
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Transceivers
SFP Transceivers
HPE X121 1G SFP LC SX Transceiver
J4858C
HPE X121 1G SFP LC LX Transceiver
J4859C
HPE X121 1G SFP RJ45 T Transceiver
J8177C
HPE X111 100M SFP LC FX Transceiver
J9054C
Internal Power Supplies
Power supplies included
Remarks:
Drop down under power supply should offer the following
options and results:
Switch/Router/Power Supply to PDU Power Cord
-
#B2B in North America, Mexico, Taiwan, and Japan or #B2C
ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord
- Localized Option (Watson Default for BTO and Box Level
CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord
- #B2E Option. (Offered only in North America,
Mexico, Taiwan, and Japan)
Cables
Multi
-Mode Cables