User Manual

QuickSpecs
HPE OfficeConnect 1820 Switch Series
Accessory Product Details
Page 31
HP
E
X111 100M SFP LC FX
Transceiver: An SFP
format 100
-megabit
transceiver with LC
connectors using FX
technology.
Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%
Nonoperating/Storage temperature:
-40°F to 185°F (-40°C to 85°C)
Nonoperat
ing/Storage relative humidity: 5% to 85%
Altitude: up to 10,000 ft. (3 km)
Cabling
Cable type:
62.5/125
µm or 50/125 µm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU
-T G.651 and
ISO/IEC 793
-2 Type A1b or A1a, respectively; Maximum distance:
• 2 km (full duplex) or 412 m (half duplex)
Notes
Transmitter wavelength: 1310nm
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support
this product, s
ee the document titled "Support for the J9054C 100-FX SFP-
LC Transceiver" on the "ProCurve Mini
-GBICs and SFPs" Manuals Web page.
Services
Refer to the Hewlett Packard Enterprise website at
http://www
.hpe.com/networking/services for details on the service-
level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HPE X121 1G SFP LC SX
Trans
ceiver (J4858C)
A small form
-factor
pluggable (SFP) Gigabit
SX
transceiver that provides a
full
-
duplex Gigabit solution
up to 550 m on multimode
fiber.
Ports
1 LC 1000BASE
-SX port; Duplex: full only
Physical characteristics
Dimensions: 2.24(d) x 0.54(w)
x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Electrical characteristics
Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W
Cabling
Type:
• 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index,
low metal content, multimode fiber optic, complying with ITU-T
G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
• 2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
• 2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
• 2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
• 2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2
-550m
Fiber type: Multi Mode