User Manual

QuickSpecs
HPE QSFP+ Transceiver
Technical Specifications
c04312725 - DA - 14980 Worldwide - Version 4 - March 29, 2016
Page 4
Breakout Cable. This
transceiver is
designed only for use
with HPE Virtual
Connect FlexFabric
20/40 F8 Module.
characteristics
Power consumption
maximum
1.5 W
Cabling
Cable type
OM3, OM4
Cable length
Up to 100m (OM3); up to 150m (OM4)
Fiber type
Multi-mode
Notes
For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish.
Angled Physical Contact (APC) is not recommended.
Services
Refer to the
Hewlett Packard Enterprise website at:
http://www.hp.com/services/bladesystem
for details on the service-level
descriptions and product numbers. For details about services and response times in
your area, please contact your local
Hewlett Packard Enterprise sales office.
HPE 40Gb QSFP+
Bidirectional
Transceiver
(841716-B21)
A 40-Gigabit
transceiver in QSFP+
form-factor that
provides duplex LC
fiber optic
connections.
Ports
Duplex LC 40GbE
Connectivity
Connector type
LC
Wavelength
850/900 nm
Physical
characteristics
Dimensions
7.13(d) x 0.72(w) x 0.33(h) in. (12.18 x 1.84 x 0.85cm)
Weight
0.08 lb. (35 g)
Transceiver form factor
QSFP+
Environment
Operating temperature
50°F to 158°F (10°C to 70°C)
Operating relative humidity
0% to 85%, noncondensing
Non
-operating/Storage
temperature
-40°F to 185°F (-40°C to 85°C)
Electrical
characteristics
Voltage Supply
3.3
Power consumption
maximum
3.5 W
Cabling
Cable type
OM3, OM4
Cable length
Up to 100m
Fiber type
Multi-mode
Notes
For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish.
Angled Physical Contact (APC) is not recommended.
Services
Refer to the Hewlett Packard Enterprise website at:
http://www.hp.com/services/bladesystem
for details on the service-level
descriptions and product numbers. For details about services and response times in
your area, please contact your local Hewlett Packard Enterprise sales office.