User Manual

QuickSpecs
HPE QSFP+ Transceiver
Technical Specifications
c04312725 - DA - 14980 Worldwide - Version 4 - March 29, 2016
Page 3
Notes
For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish.
Angled Physical Contact (APC) is not recommended.
Services
Refer to the
Hewlett Packard Enterprise website at:
http://www.hp.com/services/bladesystem
for details on the service-level
descriptions and product numbers. For details about services and response times in
your area, please contact your local
Hewlett Packard Enterprise sales office.
HPE BladeSystem c-
Class 40Gb QSFP+
LC LR4 Transceiver
(720190-B21)
A 40-Gigabit
transceiver in QSFP+
form-factor that
supports the 4x10-
Gigabit LR standard,
providing 40-Gigabit
connectivity up to
10km on single-mode
fiber.
Ports
2
LC, 40-GbE port (IEEE 802.3ba Type 40Gbase-LR4)
Connectivity
Connector type
LC
Wavelength
1310 nm
Physical
characteristics
Dimensions
5.19(d) x 0.72(w) x 0.54(h) in. (13.18 x 1.835 x 1.371cm)
Weight
0.08 lb. (35 g)
Transceiver form factor
QSFP+
Environment
Operating temperature
32°F to 158°F (0°C to 70°C)
Operating relative humidity
0% to 85%, noncondensing
Non
-operating/Storage
temperature
-40°F to 185°F (-40°C to 85°C)
Voltage Supply
3.3
Electrical
characteristics
Power consumption
maximum
1.5 W
Cable type
Single Mode Fiber (SMF)
Cabling
Maximum link length
up to 10km on SMF
Fiber type
Single-mode
Notes
For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish.
Angled Physi
cal Contact (APC) is not recommended.
Services
Refer to the
Hewlett Packard Enterprise website at:
http://www.hp.com/services/bladesystem
for details on the service-level
descriptions and product
numbers. For details about services and response times in
your area, please contact your local
Hewlett Packard Enterprise sales office.
HPE BladeSystem c-
Class 4x10G QSFP+
MPO SR4 100m
Transceiver
(805755-B21)
A 40-Gigabit
transceiver in QSFP+
form-factor that
provides 4x10Gb
connections using
MPO to 4x10Gb LC
Ports
1 MPO 40-GbE port (IEEE 802.3ba Type 40Gbase-SR4)
Connectivity
Connector type
MPO
Wavelength
850 nm
Physical
characteristics
Dimensions
5.19(d) x 0.72(w) x 0.54(h) in. (13.18 x 1.835 x 1.371cm)
Weight
0.08 lb. (35 g)
Transceiver form factor
QSFP+
Environment
Operating temperature
32°F to 158°F (0°C to 70°C)
Operating relative humidity
0% to 85%, noncondensing
Non
-operating/Storage
temperature
-40°F to 185°F (-40°C to 85°C)
Electrical
Voltage Supply
3.3