RDX Removable Disk Backup System

QuickSpecs
HPE RDX Removable Disk Backup System
Technical Specifications
Page 12
Performance and Compatibility
Native Capacity 500GB, 1TB, 2TB, 3TB or 4TB
Compressed* Capacity 1TB, 2TB, 4TB, 6TB or 8TB
* Assumes 2:1 application based data compression
Native average sustained transfer rate Up to 100 MB/s
Compressed* average sustained transfer rate Up to 200 MB/s
* Assumes 2:1 application based data compression
Average Access time < 15 ms
Supported File Systems: NTFS, FAT32, ext2, ext3, ext4 and Mac OS Extended (HFS+)
Supported Operating Systems: Windows XP, Windows Vista SP1, Windows 7, Windows 8, Windows Server 2003, Windows Server
2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Small Business
Server 2008, Small Business Server 2011, CentOS Linux, Fedora Core 5, RHEL, SLES, OS X
(HPE RDX Compatibility details are available at www.hpe.com/storage/spock)
RDX Cartridge Compatibility: Forward and backward compatible to all RDX drives and systems (Note, a firmware upgrade is
required for legacy RDX USB 2.0 drives, for use with 3TB or 4TB cartridges. See www.hpe.com/support/rdx).
Reliability
MTBF (Drive) 550,000 hours
Uncorrected Error Rate 1 error per 1014 bits read
Load/ Unload Cycles:-
Drive: Minimum of 10,000 Load/Unload cycles
Cartridge: Minimum of 5,000 Load/Unload cycles
Cartridge Drop Shock (non-operating) 1m drop to tile over concrete floor
Power Specifications and Interface
Voltage
• Internal Drive: +5V or +12V
• External Drive: +5V (USB powered or Power Adaptor) or +12V (Power Adaptor)
Operating Current during write/read (Typical/Peak):
• Internal Drive @ 5V: 0.9A / 1. 6A
• Internal Drive @ 12V: 0.005A
• External Drive @ 5V: 0.9A / 1.6A (powered via USB)
External Drive @ 5V: 1.2A / 2.4A (powered via Power Adaptor)
External Drive @12V: 0.5A / 1A (powered via Power Adaptor)
Power Connector:
• Internal Drive 4-Pin Molex
• External Drive USB 3.0 Y-cable (supplied) or Power Adaptor (not supplied)