3PAR Software Products

QuickSpecs
HPE 3PAR Software Products
Technical Specifications
Page 12
•
HPE 3PAR StoreServ system provides proper key management that is critical to maintain
separation of duties and protection against improperly cared for disks, or malicious intent
from remote office employees.
• Encryption protects against disk drive theft and un-scrubbed disk drives that repurposed.
Secure your data with Self Encrypting Drives (SED)
• All SEDs are certified by the U.S. National Institute of Standards and Technology (NIST) and
Canadian Communications Security Establishment (CSE) as meeting Level 2 security
requirements for cryptographic modules as defined in the Federal Information Processing
Standards (FIPS) 140-2 Publication.
HPE Smart SAN for 3PAR Software
Overview
HPE Smart SAN for HPE 3PAR makes end-to-end SAN configuration and management simple and
autonomic, reducing the probability of errors through SAN automation. It is an application embedded
in the SAN that leverages StoreFabric components with intelligence from the array (hosts and
switches), which enables the 3PAR to automate configuration for settings and policies across the
SAN. Smart SAN is only supported on HPE 3PAR storage, HPE StoreFabric B-series Switches, and
HPE Q and E 16Gb FC adapters (HBAs). HPE Smart SAN for 3PAR leverages Industry Standards
based Peer zoning, called Target Driven Peer Zoning (TDPZ) to automate SAN zoning. Smart SAN
features enable customers to automate peer zoning, resulting in the creation of fewer zones, and
enables configuration of zones in minutes, not hours, which is the case with traditional manual SAN
zoning. Additional information can be found here:
https://www.hpe.com/us/en/product-
catalog/storage/storage-software/pip.hpe-smart-san-for-3par.8295863.html.
HPE Smart SAN for 3PAR StoreServ 7200/7400/7200c/7400c/7440c/7450/7450c
LTU
L7D48A
HPE Smart SAN for HPE 3PAR StoreServ
7200/7400/7200c/7400c/7440c/7450/7450c E-LTU
L7D48AAE
HPE Smart SAN for 3PAR StoreServ 10400/10800 LTU
L7D50A
HPE Smart SAN for HPE 3PAR StoreServ 10400/10800 E-LTU
L7D50AAE
NOTE: HPE Smart SAN is not available as a factory install on 3PAR StoreServ 7000
and 3PAR StoreServ 10000 until 3.2.2 MU2 or higher is available as a factory install.
However, if the OS is updated to 3.2.2 MU2 or higher you can order the electronic
license to use ELTU SKUs to enable Smart SAN Software.
NOTE: Requires 3PAR StoreServ 3.2.2 or later with HPE 3PAR StoreServ 7000 2-
port 16Gb Fibre Channel Adapter E7X47A.
NOTE: Requires 3PAR StoreServ 3.2.2 or later with HPE 3PAR StoreServ 8000 4-
port 16Gb Fibre Channel Adapter H6Z00A.
NOTE: Requires 3PAR StoreServ 3.2.2 or later with HPE 3PAR StoreServ 10000 2-
port 16Gb Fiber Channel Upgrade Host Bus Adapter E7Y67A.
NOTE: Requires 3PAR StoreServ 3.2.2 or later with HPE 3PAR StoreServ 20000 4-
port 16Gb Fiber Channel Upgrade Host Bus Adapter C8S96A.
NOTE: Supports HPE FlexFabric 5900CP Series switches and HPE Flexfabric 5930
Series switches with 24-port CP 2QSFP option, Comware Software version 7.1.045,
release 2422PO1 or later.
NOTE: Supports HPE StoreFabric B-series Brocade 16/8Gb FC switches with FOS
7,4a or later.
NOTE: Supports HPE StoreFabric HPE 16Gb FC adapters: SN1000Q 2P (QW972A),
SN1000Q 1P (QW971A) and QLE2560 - 81q (AK344A), QLE2562 - 82q (AJ764A).
Product Highlights
•
Protocol agnostic end-to-end SAN management and orchestration from 3PAR StoreServ
array enabled via in-band metadata collection
• Standards based─ leverages Fibre Channel Standards Technical Committee T11 Peer
Zoning
• Automated Target Driven Peer Zoning (TDPZ) makes zoning simple for a HPE 3PAR SAN
and StoreFabric hosts and switches